Automation System
The item linear motion unit® is the all-in-one, turnkey solution for your automation needs. A portfolio of Linear Units, Motors and Controllers offer the ideal basis for configuring a customised automation solution that is tailored to your requirements. When working with the innovative configuration software item MotionDesigner®, users can formulate their transport task in as much detail as they like. item MotionDesigner® factors in the static, dynamic and thermal loads of all components and thus delivers the optimum solution from thousands of possible combinations. item MotionSoft® commissioning software and the intelligent item Controller measure the Linear Unit independently and thus calculate the optimum settings.
Sub categories
item MotionKits
item MotionKits offer everything in one package: Linear Unit, Motor, Drive Set, Controller and Cables. Fixed stroke lengths eliminate the need for detailed configuration. The carefully coordinated components can be ordered together immediately.
Linear Units
The item Automation System offers ready-to-install Linear Units for a wide range of applications. Which technology is most suitable will depend on what you want to use it for.
Linear guides
Roller Guides on shafts secured to the profile groove. C-Rail Guides in special profiles. Linear Guide Systems on guide rails on profiles 8.
Drive elements
item drive elements use a friction-based connection to transmit torque to the Linear Unit free from play. The Drive Sets comprise a coupling and housing.
Gearboxes
Gearboxes connect together the Linear Unit, Drive Set and Motor and ensure users can achieve the correct ratio of input speed, torque and precise carriage positioning for any application.
Motors
item servomotors are available in three sizes (40, 60 and 80 mm) that are precisely configured for the Gearboxes and Drive Sets in the item Automation System.
Controllers
item Controllers have been designed to perfectly match the Motors and Linear Units of the item Automation System.
Software
This intelligent software covers everything and factors in your dynamic requirements and technical parameters.
Accessories
Accessories from item are fully compatible add-on elements for item Linear Units.
Products
Showing 241–300 of 414 results
-
Slide Set LRF 8 D10
Art. no: 0.0.658.83 -
Drive Set 5 40 D30/D12
Art. no: 0.0.662.49 -
Synchronising Set D40/D15
Art. no: 0.0.662.50 -
Synchronising Set D30/D12
Art. no: 0.0.662.51 -
Timing-Belt Reverse Unit 8 40 R25 with Bore D15
Art. no: 0.0.662.52 -
Synchroniser Shaft Cover Set GSF 8 40 R10
Art. no: 0.0.662.54 -
Linear Unit LRE 8 D10 80×40 ZU 40 R25
Art. no: 0.0.662.70 -
Timing-Belt Reverse Unit 5 40 R10 with Bore D12
Art. no: 0.0.662.73 -
Timing-Belt Reverse Unit 8 80 R25 with Bore D34
Art. no: 0.0.662.88 -
Linear Unit LRE 8 D14 80×40 ZU 40 R25
Art. no: 0.0.662.91 -
Synchronising Set GSF 8 40 R10
Art. no: 0.0.662.95 -
Linear Unit LRE 8 D14 80×40 ZU 80 R25
Art. no: 0.0.663.12 -
Linear Unit LRE 8 D14 80×80 ZU 40 R25
Art. no: 0.0.663.25 -
Linear Unit LRE 8 D14 80×80 ZU 80 R25
Art. no: 0.0.663.26 -
Linear Unit LRE 8 D10 80×80 ZU 40 R25
Art. no: 0.0.663.32 -
Linear Unit LRE 8 D14 120×80 ZU 40 R25
Art. no: 0.0.663.34 -
Linear Unit LRE 8 D14 120×80 ZU 80 R25
Art. no: 0.0.663.35 -
Linear Unit LRE 8 D25 120×80 ZU 80 R25
Art. no: 0.0.663.36 -
Tube D16x1.5 St, stainless
Art. no: 0.0.664.14 -
Linear Unit LRE 8 D14 80×40 ZS
Art. no: 0.0.664.28 -
Chain Reverse Unit 8 80 with Bore D15
Art. no: 0.0.664.53 -
Linear Unit LRE 8 D14 80×40 KU 80
Art. no: 0.0.664.54 -
Timing-Belt Reverse Unit 8 80 R50 II with Bore D34
Art. no: 0.0.665.45 -
Motor SE 60-150-3-60-R-B, white aluminium, similar to RAL 9006
Art. no: 0.0.665.99 -
Motor SE 60-150-3-60-R, white aluminium, similar to RAL 9006
Art. no: 0.0.666.02 -
Motor SE 40-035-3-90-R, white aluminium, similar to RAL 9006
Art. no: 0.0.666.03 -
Motor SE 40-035-3-90-R-B, white aluminium, similar to RAL 9006
Art. no: 0.0.666.04 -
Gearbox AP 40-3, white aluminium, similar to RAL 9006
Art. no: 0.0.666.05 -
Gearbox AP 40-5, white aluminium, similar to RAL 9006
Art. no: 0.0.666.06 -
Gearbox AP 40-7, white aluminium, similar to RAL 9006
Art. no: 0.0.666.07 -
Gearbox WP 40-3, white aluminium, similar to RAL 9006
Art. no: 0.0.666.08 -
Gearbox WP 40-5, white aluminium, similar to RAL 9006
Art. no: 0.0.666.09 -
Gearbox WP 40-7, white aluminium, similar to RAL 9006
Art. no: 0.0.666.10 -
Gearbox AP 60-3, white aluminium, similar to RAL 9006
Art. no: 0.0.666.11 -
Gearbox AP 60-5, white aluminium, similar to RAL 9006
Art. no: 0.0.666.12 -
Gearbox AP 60-7, white aluminium, similar to RAL 9006
Art. no: 0.0.666.13 -
Gearbox WP 60-3, white aluminium, similar to RAL 9006
Art. no: 0.0.666.14 -
Gearbox WP 60-5, white aluminium, similar to RAL 9006
Art. no: 0.0.666.15 -
Gearbox WP 60-7, white aluminium, similar to RAL 9006
Art. no: 0.0.666.16 -
Gearbox AP 80-3, white aluminium, similar to RAL 9006
Art. no: 0.0.666.17 -
Gearbox AP 80-5, white aluminium, similar to RAL 9006
Art. no: 0.0.666.18 -
Gearbox AP 80-7, white aluminium, similar to RAL 9006
Art. no: 0.0.666.19 -
Gearbox WP 80-3, white aluminium, similar to RAL 9006
Art. no: 0.0.666.20 -
Gearbox WP 80-5, white aluminium, similar to RAL 9006
Art. no: 0.0.666.21 -
Gearbox WP 80-7, white aluminium, similar to RAL 9006
Art. no: 0.0.666.22 -
Bearing Carriage PS 4-20
Art. no: 0.0.666.39 -
Linear Unit LRE 8 D25 200×80 ZU 80 R25
Art. no: 0.0.666.53 -
Synchronising Set D55/D34
Art. no: 0.0.666.60 -
Synchronising Set D80/D34
Art. no: 0.0.666.61 -
Linear Unit LRE 8 D25 120×80 ZU 80 R50
Art. no: 0.0.666.65 -
Linear Unit LRE 8 D25 200×80 ZU 80 R50
Art. no: 0.0.666.66 -
Linear Unit LRE 5 D6 60×20 ZU 40 R10
Art. no: 0.0.666.89 -
Drive Set KGT D40/D15
Art. no: 0.0.667.76 -
Ball Screw Unit KGT 20×5 with Bore D15
Art. no: 0.0.667.83 -
Drive Set 8 40 D40/D15
Art. no: 0.0.668.02 -
Drive Set 8 80 D55/D34
Art. no: 0.0.668.03 -
Drive Set 8 80 D80/D34
Art. no: 0.0.668.04 -
Linear Unit LRE 8 D14 80×80 KGT 20×5
Art. no: 0.0.668.06 -
Linear Unit LRE 8 D14 80×80 KGT 20×20
Art. no: 0.0.668.08 -
Linear Unit LRE 8 D10 80×80 KGT 20×20
Art. no: 0.0.668.10
