Automation System
The item linear motion unit® is the all-in-one, turnkey solution for your automation needs. A portfolio of Linear Units, Motors and Controllers offer the ideal basis for configuring a customised automation solution that is tailored to your requirements. When working with the innovative configuration software item MotionDesigner®, users can formulate their transport task in as much detail as they like. item MotionDesigner® factors in the static, dynamic and thermal loads of all components and thus delivers the optimum solution from thousands of possible combinations. item MotionSoft® commissioning software and the intelligent item Controller measure the Linear Unit independently and thus calculate the optimum settings.
Sub categories
item MotionKits
item MotionKits offer everything in one package: Linear Unit, Motor, Drive Set, Controller and Cables. Fixed stroke lengths eliminate the need for detailed configuration. The carefully coordinated components can be ordered together immediately.
Linear Units
The item Automation System offers ready-to-install Linear Units for a wide range of applications. Which technology is most suitable will depend on what you want to use it for.
Linear guides
Roller Guides on shafts secured to the profile groove. C-Rail Guides in special profiles. Linear Guide Systems on guide rails on profiles 8.
Drive elements
item drive elements use a friction-based connection to transmit torque to the Linear Unit free from play. The Drive Sets comprise a coupling and housing.
Gearboxes
Gearboxes connect together the Linear Unit, Drive Set and Motor and ensure users can achieve the correct ratio of input speed, torque and precise carriage positioning for any application.
Motors
item servomotors are available in three sizes (40, 60 and 80 mm) that are precisely configured for the Gearboxes and Drive Sets in the item Automation System.
Controllers
item Controllers have been designed to perfectly match the Motors and Linear Units of the item Automation System.
Software
This intelligent software covers everything and factors in your dynamic requirements and technical parameters.
Accessories
Accessories from item are fully compatible add-on elements for item Linear Units.
Products
Showing 61–120 of 414 results
-
Slide Cap 8 80×40 D14, black
Art. no: 0.0.386.08 -
Clamp-Block Cap 8 80×40 D14, black
Art. no: 0.0.386.09 -
Ball-Bearing Guide Bush Set 8 160×40 D14
Art. no: 0.0.386.10 -
Ball-Bearing Guide Bush Set 8 80×40 D14
Art. no: 0.0.386.11 -
Ball-Bearing Guide Bush Unit 8 D14
Art. no: 0.0.386.12 -
Shaft-Clamping Bush 8 D25
Art. no: 0.0.387.03 -
Slide Cap 8 160×80 D25, black
Art. no: 0.0.387.06 -
Clamp-Block Cap 8 160×80 D25, black
Art. no: 0.0.387.07 -
Slide Cap 8 80×80 D25, black
Art. no: 0.0.387.08 -
Clamp-Block Cap 8 80×80 D25, black
Art. no: 0.0.387.09 -
Ball-Bearing Guide Bush Set 8 160×80 D25
Art. no: 0.0.387.10 -
Ball-Bearing Guide Bush Set 8 80×80 D25
Art. no: 0.0.387.11 -
Ball-Bearing Guide Bush Unit 8 D25
Art. no: 0.0.387.12 -
Roller Profile 5 D6, natural
Art. no: 0.0.390.01 -
Shaft-Clamp Profile 5 D6, natural
Art. no: 0.0.390.02 -
Bolt 5 D6 c, bright zinc-plated
Art. no: 0.0.390.03 -
End Cap and Lubricating System 5 D6, black
Art. no: 0.0.390.12 -
Pin Spanner 5 D6, 8 D10, black
Art. no: 0.0.390.13 -
Bearing Unit 5 D6 c
Art. no: 0.0.390.15 -
Bearing Unit 5 D6 e
Art. no: 0.0.390.16 -
Double-Bearing Unit 5 D6 c
Art. no: 0.0.390.17 -
Double-Bearing Unit 5 D6 e
Art. no: 0.0.390.18 -
Bolt 5 D6 e, bright zinc-plated
Art. no: 0.0.390.19 -
Timing Belt R10 T5, black
Art. no: 0.0.400.04 -
Timing-Belt Tensioner, Fixing Block 5 R10
Art. no: 0.0.400.06 -
Timing-Belt Tensioner, Tensioning Block 5 R10
Art. no: 0.0.400.07 -
Shaft D10, bright
Art. no: 0.0.401.09 -
Bevel Gearbox WG 90°
Art. no: 0.0.408.10 -
Centring Piece D50-D50, black
Art. no: 0.0.408.12 -
Adapter Plate 80×80, black
Art. no: 0.0.408.16 -
Bevel Gearbox WG 180°
Art. no: 0.0.408.20 -
Fastening Set U40-WG
Art. no: 0.0.408.23 -
Bevel Gearbox WG 180° D
Art. no: 0.0.408.25 -
Bevel Gearbox WG 360°
Art. no: 0.0.408.26 -
Bevel Gearbox WG 360° D
Art. no: 0.0.408.27 -
Timing-Belt Reverse Unit 5 40 R10 VK14
Art. no: 0.0.410.01 -
Timing-Belt Reverse Unit 5 40 R10 with Bore
Art. no: 0.0.410.06 -
Ball Screw Unit KGT 20×20, VK14
Art. no: 0.0.414.32 -
Ball Screw Unit KGT 20×5, VK14
Art. no: 0.0.414.33 -
Ball Screw Unit KGT 20×20, bored and keyed to customer specification
Art. no: 0.0.414.50 -
Ball Screw Unit KGT 20×5, bored and keyed to customer specification
Art. no: 0.0.414.51 -
Timing Belt R50 T10, black
Art. no: 0.0.426.03 -
Timing-Belt Tensioner, Tensioning Block 8 R50
Art. no: 0.0.426.04 -
Timing-Belt Tensioner, Fixing Block 8 R50
Art. no: 0.0.426.05 -
Timing-Belt Reverse Unit 8 80 R50 II VK32
Art. no: 0.0.426.19 -
Timing-Belt Reverse Unit 8 80 R50 II with Bore
Art. no: 0.0.426.21 -
Timing-Belt Tensioner, Tensioning Block 8 R25
Art. no: 0.0.426.29 -
Timing Belt Tensioner, Fixing Block 8 R25
Art. no: 0.0.426.30 -
Timing-Belt Tensioner Holder 8 R25
Art. no: 0.0.426.33 -
Timing-Belt Tensioner Holder 8 R50
Art. no: 0.0.426.36 -
Roller Profile 8 D10, natural
Art. no: 0.0.442.01 -
Roller D10
Art. no: 0.0.442.02 -
Shaft-Clamp Profile 8 D10, natural
Art. no: 0.0.442.03 -
Bolt 8 D10 c, bright zinc-plated
Art. no: 0.0.442.06 -
Bolt 8 D10 e, bright zinc-plated
Art. no: 0.0.442.07 -
Bearing Unit 8 D10 e
Art. no: 0.0.442.09 -
Bearing Unit 8 D10 c
Art. no: 0.0.442.10 -
Double-Bearing Unit 8 D10 e
Art. no: 0.0.442.14 -
Double-Bearing Unit 8 D10 c
Art. no: 0.0.442.15 -
End Cap and Lubricating System 8 D10, black
Art. no: 0.0.442.23
