Linear Units with a timing-belt drive
When speed and reliability are the primary concerns, the best option is a timing-belt drive. This supports extremely dynamic movements and therefore short cycle times.In a timing-belt drive, a toothed drive belt locks mechanically around a toothed pulley driven by a motor. This mechanical interlocking eliminates slip and ensures that high forces can be transmitted. The system can also reverse its direction rapidly and accelerate large masses. Linear Units with a timing-belt drive can be built in virtually any length. As a result, they produce Linear Units that combine high drive forces with long travel distances. The drive effect is applied where the timing belt is reversed.
Products
Showing all 22 results
-
Linear Unit KLE 8 80×80 LR
Art. no: 0.0.605.02 -
Linear Unit KLE 6 60×60 LR
Art. no: 0.0.605.07 -
Linear Unit KRF 8 80×40 ZR, left-hand input shaft
Art. no: 0.0.641.21 -
Linear Unit KRF 8 80×40 ZR, right-hand input shaft
Art. no: 0.0.648.66 -
Linear Unit KRF 8 80×40 ZR, synchronous drive
Art. no: 0.0.648.69 -
Linear Unit GSF 8 40 R10
Art. no: 0.0.655.98 -
Linear Unit LRE 8 D10 80×40 ZU 40 R25
Art. no: 0.0.662.70 -
Linear Unit LRE 8 D14 80×40 ZU 40 R25
Art. no: 0.0.662.91 -
Linear Unit LRE 8 D14 80×40 ZU 80 R25
Art. no: 0.0.663.12 -
Linear Unit LRE 8 D14 80×80 ZU 40 R25
Art. no: 0.0.663.25 -
Linear Unit LRE 8 D14 80×80 ZU 80 R25
Art. no: 0.0.663.26 -
Linear Unit LRE 8 D10 80×80 ZU 40 R25
Art. no: 0.0.663.32 -
Linear Unit LRE 8 D14 120×80 ZU 40 R25
Art. no: 0.0.663.34 -
Linear Unit LRE 8 D14 120×80 ZU 80 R25
Art. no: 0.0.663.35 -
Linear Unit LRE 8 D25 120×80 ZU 80 R25
Art. no: 0.0.663.36 -
Linear Unit LRE 8 D25 200×80 ZU 80 R25
Art. no: 0.0.666.53 -
Linear Unit LRE 8 D25 120×80 ZU 80 R50
Art. no: 0.0.666.65 -
Linear Unit LRE 8 D25 200×80 ZU 80 R50
Art. no: 0.0.666.66 -
Linear Unit LRE 5 D6 60×20 ZU 40 R10
Art. no: 0.0.666.89 -
Transverse Carriage Plate KLE 6 60×60
Art. no: 0.0.692.19 -
Transverse Carriage Plate KLE 8 80×80
Art. no: 0.0.692.61 -
Linear Unit KLE 5 40×40 LR
Art. no: 0.0.710.86
