Caps
Caps Zn and St must be secured with screws into the profile core bore. Plastic caps can also be secured in this way if desired. Radiused caps for the end faces of the various profile geometries; the cut face does not need to be deburred.
Sub categories
Caps for profiles in modular dimensions
Robust Caps made from glass-fibre-reinforced plastic. Vibration-proof and temperature-resistant. Protection against sharp cut edges.
Caps 8 St
Robust steel plates. Screws ensure a secure hold. Closes large Profiles 8.
Rubber-coated caps
Steel cap with rubber coating. Closes and cushions at the same time. With self-tapping screw for rapid installation.
Caps Zn
Sturdy caps made from zinc. Screws ensure a secure hold. Closes Profiles 8 and protects against impacts.
Caps for flat cross-sections
Simply push in to safely cover cut edges. Neatly close side areas and end faces. Suitable for profiles with flat cross-sections. Products from Line X also available.
Caps with radiused outer face
Aesthetically appealing. No need to deburr cut edges. Suitable for various angle measurements: 30°, 45°, 60°, 90° and 270°.
Caps with angled outer face
Caps. angle geometry
Covers for holes and bores
Safe and clean: Seal profile bores to stop dust getting inside, Available in two colours.
Products
Showing 1–60 of 157 results
-
Cap 12 60×60, black
Art. no: 0.0.005.01 -
Cap 12 120×60, black
Art. no: 0.0.005.02 -
Cap 12 120×120, black
Art. no: 0.0.005.03 -
Cap 12 240×120, black
Art. no: 0.0.005.04 -
Cap 12 240×60, black
Art. no: 0.0.005.05 -
Cap 8 40×40, black
Art. no: 0.0.026.01 -
Cap 8 80×40, black
Art. no: 0.0.026.02 -
Cap 8 80×80, black
Art. no: 0.0.026.37 -
Cap 8 40×16, black
Art. no: 0.0.026.79 -
Cap 8 160×28, black
Art. no: 0.0.026.80 -
Cap 8 160×40, black
Art. no: 0.0.265.39 -
Cap 8 160×80, black
Art. no: 0.0.265.40 -
Cap 8 80×16, black
Art. no: 0.0.265.98 -
Cap 5 16×8.5, black
Art. no: 0.0.364.60 -
Cap 5 20×20, black
Art. no: 0.0.370.09 -
Cap 5 40×20, black
Art. no: 0.0.370.11 -
Cap 5 40×40, black
Art. no: 0.0.370.13 -
Cap 5 80×14, black
Art. no: 0.0.370.91 -
Cap 5 80×20, black
Art. no: 0.0.370.92 -
Cap 8 160×16, black
Art. no: 0.0.373.00 -
Cap 8 40×40-45°, black
Art. no: 0.0.373.48 -
Cap 5 20×10, black
Art. no: 0.0.391.12 -
Cap 5 40×10, black
Art. no: 0.0.391.14 -
Cap 8 R40/80-45°, black
Art. no: 0.0.409.15 -
Cap 8 80×80-45°, black
Art. no: 0.0.418.36 -
Cap 8 120×40, black
Art. no: 0.0.418.54 -
Cap 8 120×80, black
Art. no: 0.0.418.57 -
Cap 6 30×30, black
Art. no: 0.0.419.22 -
Cap 6 60×30, black
Art. no: 0.0.419.23 -
Cap 6 60×60, black
Art. no: 0.0.419.24 -
Cap 6 120×30, black
Art. no: 0.0.419.25 -
Cap 6 120×60, black
Art. no: 0.0.419.26 -
Cap 5 60×20, black
Art. no: 0.0.425.53 -
Cap 5 60×40, black
Art. no: 0.0.425.56 -
Cap 5 R20/40-30°, black
Art. no: 0.0.425.59 -
Cap 5 R20/40-45°, black
Art. no: 0.0.425.62 -
Cap 5 R20/40-60°, black
Art. no: 0.0.425.65 -
Cap 5 R20/40-90°, black
Art. no: 0.0.425.68 -
Cap 5 R20-90°, black
Art. no: 0.0.425.71 -
Fastening Screw 8 5×14, black
Art. no: 0.0.427.08 -
Cap 8 40×40 Zn, black
Art. no: 0.0.427.09 -
Cap 8 80×40 Zn, black
Art. no: 0.0.427.11 -
Cap 8 80×80 Zn, black
Art. no: 0.0.427.13 -
Cap 8 R40/80-30°, black
Art. no: 0.0.427.69 -
Cap 8 R40/80-60°, black
Art. no: 0.0.427.70 -
Cap 8 R40/80-90°, black
Art. no: 0.0.427.71 -
Countersunk Screw 8 SF M7.1×16, black
Art. no: 0.0.428.05 -
Cap 8 W40x40 E, black
Art. no: 0.0.429.51 -
Cap 8 W80x80 E, black
Art. no: 0.0.429.54 -
Cap 8 D7, black
Art. no: 0.0.432.06 -
Cap 8 D7-45°, black
Art. no: 0.0.432.96 -
Cap 6 30×30-45°, black
Art. no: 0.0.434.74 -
Cap 6 R30-90°, black
Art. no: 0.0.434.75 -
Cap 8 R40-90°, black
Art. no: 0.0.436.34 -
Cap 5 D4.3, black
Art. no: 0.0.437.89 -
Cap 6 D5.5, black
Art. no: 0.0.439.86 -
Cap 6 D5.5-45°, black
Art. no: 0.0.439.87 -
Cap 6 R30/60-30°, black
Art. no: 0.0.459.39 -
Cap 6 R30/60-45°, black
Art. no: 0.0.459.40 -
Cap 6 R30/60-60°, black
Art. no: 0.0.459.41
