Controller C 3-05

Controller C 3-05 is a modular, programmable servo controller designed for three-phase operation. USB, Ethernet, RS-232 and CANopen interfaces are series standard. All standard fieldbus systems can be expanded using additional interface modules. This means you can easily retrofit EtherCAT, PROFIBUS and PROFINET. Safety Module STO (Safe Torque Off) makes things even safer by putting the Motor into a no-torque state when at rest. To ensure precise motion over long-term use, the Controller features integrated encoder interfaces for resolvers and absolute encoders. You can save motion profiles directly to the Controller. Signals for start/stop switches, sensors, etc. can also be processed in the program sequence. Freely programmable I/O ports are available for this purpose. Setup and programming work is carried out using the intuitive software program item MotionSoft ® . item Controllers have CE and UL certifications. Note: Shield Terminal Block D14 (0.0.668.19) from item should be used to ensure problem-free signal processing.

Caution! The C-Series controller should be secured by a USB-isolating device if connected with a laptop computer. There could be a potential difference between both devices, caused by the suppression capacitor inside the laptop power supply. The current flow can damage the controllers USB port. You can ignore this precaution if the laptop is used in battery mode without being connected to a power supply.