| Set CAD-format | ||
|---|---|---|
| Double-Beard Insert | CADPDFRFQ |
Preview
Double-Beard Insert
Double-beard key insert, PA-GF, black Double-beard key, GD-Zn, bright zinc-plated 2 T-Slot Nuts 8 Al M5 2 Countersunk Screws DIN 7991-M5x16, St, bright zinc-plated Lock body, POM, black Lock body cover, PA, black
Scope of Delivery
Double-beard key insert, PA-GF, black Double-beard key, GD-Zn, bright zinc-plated 2 T-Slot Nuts 8 Al M5 2 Countersunk Screws DIN 7991-M5x16, St, bright zinc-plated Lock body, POM, black Lock body cover, PA, black
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 80 g |
| Delivery unit | 1 set |
The Double-Beard Insert is a special actuator for Integrated Lock System 8 (see Comprehensive Catalogue, Section 4.3 Locks). It is required if doors are only to be opened with a double-beard key. The Double-Beard Insert is used with Rotating Pawl Latch 8 and can additionally be combined with Rod Latches 8. The set includes the necessary fastening elements, the double-beard key and the square drive.
Integrated Lock System 8 is a modular door lock for guards and enclosures. The various configurations using pawl latches or rods enable doors to be locked in up to three directions. The lock is fully integrated into Profile 8 or Profile 8 light (not clamp profiles) - the rotating pawl latch swings into the lateral profile groove and the rods are concealed in the profile core bore. The system can be operated from either one side or both sides of the door (i.e. inside/outside). There is also the option of locking the door from one side by using the lockable Door Knob.
The basic version of the door lock with Integrated Lock System 8 consists of Rotating Pawl Latch 8 and at least one Door Knob. A Rod Latch 8 is required for the rod for both the upper and lower ends of the door.