Synchroniser Shaft Equaliser Coupling VK32

When using synchronising shafts to transfer torque, it may be necessary to ensure the connected drives can be adjusted during installation. The Synchroniser Shaft Equaliser Coupling can be used to divide a synchronising shaft in two and then create a friction-based connection between the two shaft sections. The snap rings W32 should be used to secure the synchronising shaft axially between the drive elements.

The Synchroniser Shaft Equaliser Coupling is positioned at the ends of the Multi-Spline Shafts and power-lock connected using clamping screws. The tightening torque of the clamping screws is 25 Nm (Equaliser Coupling VK14) or 50 Nm (Equaliser Coupling VK32). The two halves of the coupling must be screwed onto degreased shaft ends using the waxed screws supplied, so as to transfer the necessary torque.