Support Profile 80-45°, natural

Support Profiles 80-45° and 160-20° are particularly suitable, as the lids of a modular conduit, for constructing operating consoles of any length, manual control boxes or similar applications. The housings can be used to hold and secure printed circuit boards of various sizes up to width 100 mm.

Flush-Mounted Sockets are easily installed in Wall Profiles, Support Profiles, panel elements, sheets etc. When using the supplied insulation box with strain relief and shock-proof leads, the conduit elements do not need to be connected to the protective conductor system. Electrical connection must be carried out only by a fully qualified electrician. The sockets are VDE-compliant (German standard sockets). The 2-pole connection is designed for standard conditions (16 A and 250 V alternating current).

Support Profile 80-45° can be used as floor or lid element, while Support Profile 160-20° can only be used as a lid profile. The Wall Profiles must exhibit a height difference of 40 mm .

Wall Profiles and Lid Profiles can be secured in position by means of Self-Tapping Screw St 4.2x9.5. The Support Profiles must be provided with a bore ⌀ 3.5 mm in the marking groove for this purpose. The screw connection creates a conductive bond between the conduit elements.