Synchronising Set D55/D34

2 Coupling Halves D55/D25, Al 2 expanding hub coupling half D55/D34, St and Al 2 Coupling Inserts D55, PU, green Tightening torque, expanding hub screw: 23 Nm Tightening torque, clamping hub screw: 9.6 Nm

Tuotenro: 0.0.666.60 Osasto: Avainsana tuotteelle
Set CAD-format
Synchronising Set D55/D34CADPDFRFQ

Preview

Scope of Delivery

2 Coupling Halves D55/D25, Al 2 expanding hub coupling half D55/D34, St and Al 2 Coupling Inserts D55, PU, green Tightening torque, expanding hub screw: 23 Nm Tightening torque, clamping hub screw: 9.6 Nm

Properties

line 8line 8
ESD-safeNo
Weightm = 756 g
Delivery unit1 set
Synchronising Sets from item can be used to operate two Linear Units in parallel with just one motor. They comprise shaft couplings that are tailored to the relevant Linear Unit and designed to compensate for slight misalignments and withstand the stated torque over long-term use. These couplings are pre-prepared to accommodate a synchronising shaft. Besides featuring a compact design, expanding hub couplings are also easy to use. The friction-based connection is created by tightening the central screw with the specified tightening torque. An integrated pull-off thread makes them easy to dismantle. First, the central screw is removed, then a longer screw is driven into the same position to effortlessly relieve tension in the coupling. Please note that the maximum length of the synchronising shaft varies depending on its operating speed.
Automation