| Set CAD-format | ||
|---|---|---|
| Bevel Gearbox WG 90° | CADPDFRFQ |
Preview
Bevel Gearbox WG 90°
Box, box lid and Bearing Blocks, Al, anodized, black Straight-toothed ball-bearing bevel gear pairs, made of high strength steel with minimal backlash and wear-resistant surface Prelubricated, maintenance-free Gear ratio i = 1 : 1 Nominal torque M nom = 10 Nm Nominal speed n nom = 400 min -1 Nominal power P nom = 0.419 kW Torque M max. = 28 Nm Speed n max. = 1000 min -1 Power P max. = 1.173 kW Service life L = 10,000 h Play angle a max. = 20 ’
Scope of Delivery
Box, box lid and Bearing Blocks, Al, anodized, black Straight-toothed ball-bearing bevel gear pairs, made of high strength steel with minimal backlash and wear-resistant surface Prelubricated, maintenance-free Gear ratio i = 1 : 1 Nominal torque M nom = 10 Nm Nominal speed n nom = 400 min -1 Nominal power P nom = 0.419 kW Torque M max. = 28 Nm Speed n max. = 1000 min -1 Power P max. = 1.173 kW Service life L = 10,000 h Play angle a max. = 20 ’
Properties
| line 8 | line 8 |
|---|---|
| Torque max. | Mmax. = 28 Nm |
| Torque, rated | Mnom. = 10 Nm |
| Speed max. | nmax. = 1000 min-1 |
| Speed, rated | nnom. = 400 min-1 |
| ESD-safe | No |
| Weight | m = 2 kg |
| Power, max | Pmax. = 1.173 kW |
| Power, rated | Pnom. = 0.419 kW |
| Delivery unit | 1 pce. |
Bevel Gearboxes can be used between a particular drive mechanism and a linear axis, consisting of a guide and either a timing-belt drive, chain drive or Ball Screw Unit. In this arrangement, the induced torque is turned through 90°. In addition to this reversing action, alternative versions with different kinematics also permit distribution of the induced torque with the choice of direction of rotation of the output shafts. Subsequent changeover to other kinematics is also possible. Bevel Gearboxes feature high efficiency, have low backlash gears and low mechanical wear. > For use in conjunction with linear and rotary units, conveyors, handling devices, lifting systems and other fixtures > Powered by hand wheel, AC/DC motors, stepping motors and hydraulic or pneumatic drive mechanisms > Can be combined with timing-belt drives, chain drives and Ball Screw Units > Individual components are replaceable > Subsequent conversion to other kinematics also possible > Compact external dimensions > Full compatibility with MB Building Kit System products
The diagram is used for calculating the permissible torques M and speeds n of the Bevel Gearboxes. For loads in the continuous rated zone, continuous operation is permissible. In the intermittent rated zone, operating times must be reduced accordingly.
The geometry for connecting multi-spline hub to Multi-Spline Shaft or solid shaft ⌀ 30 mm can be changed by using Connecting Shaft U-WG or the Adapter Shaft.
