| Set CAD-format | ||
|---|---|---|
| Support Arm X 6-8 | CADPDFRFQ |
Preview
Support Arm X 6-8
Angle Bracket, die-cast zinc, white aluminium Cap, PA-GF, grey T-Slot Nut V 8 St M6, bright zinc-plated Button-Head Screw ISO 7380-M6x20, St, bright zinc-plated Washer ISO 7089 – 6 – 200 HV, bright zinc-plated Button-Head Screw ISO 7380-M6x16, St, bright zinc-plated Washer 10.5×10.5×1.3, St, bright zinc-plated Clamping element, die-cast zinc, white aluminium Support, PUR, grey
Scope of Delivery
Angle Bracket, die-cast zinc, white aluminium Cap, PA-GF, grey T-Slot Nut V 8 St M6, bright zinc-plated Button-Head Screw ISO 7380-M6x20, St, bright zinc-plated Washer ISO 7089 - 6 - 200 HV, bright zinc-plated Button-Head Screw ISO 7380-M6x16, St, bright zinc-plated Washer 10.5x10.5x1.3, St, bright zinc-plated Clamping element, die-cast zinc, white aluminium Support, PUR, grey
Properties
| Line | line X |
|---|---|
| line 6 | line 6 |
| line 8 | line 8 |
| ESD-safe | No |
| Weight | m = 198 g |
| Force max | Fmax. = 80 N |
| Delivery unit | 1 set |
Support Arm X 6-8 is a support for glass shelves or other inherently stable panel elements. Rear clamping of the panel element allows cantilever fastening to a Line 6 or Line 8 profile structure. The form of Support Arm X 6-8 corresponds to the clean contour of profile form X. The load-carrying capacity of the shelf and the holding force indicated for the Support Arms must not be exceeded. The total load applies to the indicated distances between supports with an even distribution of weight!
Support Arms X 6-8 are suitable for clamping panel elements 4 to 10 mm thick. The tightening torque for the tensioning screw must not exceed 3 Nm. Support Arm X 6-8 is fastened in the groove in Profiles 8 using a screw connection with T-Slot Nut 8. When using Support Arm X 6-8 with Line 6 profiles, a T-Slot Nut 6 St M6 (0.0.419.40) with a Button-Head Screw M6x14 (0.0.417.26) is required.
The permissible depth of the shelf is l max. = 200 mm with a load F max. = 80 N. The distance between two Support Arms should not exceed 500 mm.