Radius Seal 6 60×30 R30, grey similar to RAL 7042

The plastic Radius Seals ensure a continuous transition for the external contour of 90° profile connections. The gap between the straight end-face saw cut of the profile and the profile edge radius is filled by the seal. This simplifies cleaning and prevents dirt from entering the profile cavities. Radius Seals can therefore be used particularly effectively in clean-room conditions. The Radius Seals can be used in combination with all MB System connecting elements. Important: When using the Radius Seal with Standard, Universal and Automatic Fasteners the power-look connection is affected by an interlying plastic element which reduces the load that the connnection will bear. It is advisable to use an additional safety factor of 2 at the design stage.

The designations R30 and R60 refer to the length of the side of the seal facing the profile radius.

In calculating the length of the cross profiles between two profiles, the thickness of the Radius Seals on each side must be taken into account.