Table Column Set 8 80×40 K

The basis for autonomous work benches! Using a cranked handle to adjust the height means work benches based on Table Column Set 8 80x40 K do not require any electrical power. The four table columns can be adjusted in height by up to 300 mm, have Line 8 grooves on the outside and use Profiles 8 80x40 as supporting struts for the Table Top. Tube D16 6 A/F acts as a synchroniser shaft, is concealed inside the frame and transmits torque evenly. Profiles 8 80x40 and Tubes D16 6 A/F need to be added to the set as appropriate for the required table size. Tubes D16 6 A/F and Profiles 8 80x40 in the desired lengths must also be ordered for use with the Table Column Set. This makes it possible to build work benches with any dimensions you like, up to 1800 mm x 1800 mm.

Table Column Set 8 80x40 K produces customised, manually height-adjustable work benches. Working height can be adjusted by up to 300 mm using a crank drive. This means robust benches for production or maintenance applications can be built with minimal materials. Load-carrying capacity is up to 120 kg. Compatibility with all the components in the Work Bench System and the entire item Building Kit System ensures your construction can be tailored precisely to your requirements. This solution is also ideal for mobile, ergonomic workstations that don’t need a power supply.

The crank can be removed and, if required, can be securely stowed on the work bench using Magnetic Holder 8 Nd (0.0.687.14).

The synchronised height-adjustment system for the four table columns utilises Tube D16 6 A/F (0.0.699.97), which is concealed within the table frame.

1 2x 7.0.000.26 L 1 [mm] = T[mm]-200 2 3x 7.0.000.09 L 2 [mm] = B[mm]-80 3 1x 7.0.000.26 L 3 [mm] = B[mm]-120 4 1x 7.0.000.09 L 4 [mm] = √[(B-140) 2 +542 2 ] - 60 5 2x 7.0.000.09 L 5 [mm] = T[mm]-160 6 2x 0.0.699.98 L 6 [mm] = T[mm]-207 7 1x 0.0.699.98 L 7 [mm] = B[mm]-126