Door Knob

Door Knob, PA, black Square pin 56 mm long, St, bright zinc-plated Square pin 112 mm long, St, bright zinc-plated 2 T-Slot Nuts 8 Al M5 2 Countersunk Screws DIN 7991-M5x16, St, bright zinc-plated

Tuotenro: 0.0.486.79 Osasto: Avainsana tuotteelle
Set CAD-format
Door KnobCADPDFRFQ

Preview

Scope of Delivery

Door Knob, PA, black Square pin 56 mm long, St, bright zinc-plated Square pin 112 mm long, St, bright zinc-plated 2 T-Slot Nuts 8 Al M5 2 Countersunk Screws DIN 7991-M5x16, St, bright zinc-plated

Properties

line 8line 8
ESD-safeNo
Weightm = 128 g
Delivery unit1 set
Ergonomically designed Door Knob for actuating Integrated Lock System 8 and serving as a handle for Rotating Pawl Latch 8. The lockable version uses a locking bar to prevent rotation of the Door Knob. The set includes the necessary fastening elements and two square pins for actuating the lock from one or both sides. If the door is to be opened from both sides, 2 Door Knob sets must be combined. The lockable Door Knob can only be actuated from one side.
Integrated Lock System 8 is a modular door lock for guards and enclosures. The various configurations using pawl latches or rods enable doors to be locked in up to three directions. The lock is fully integrated into Profile 8 or Profile 8 light (not clamp profiles) - the rotating pawl latch swings into the lateral profile groove and the rods are concealed in the profile core bore. The system can be operated from either one side or both sides of the door (i.e. inside/outside). There is also the option of locking the door from one side by using the lockable Door Knob.

The basic version of the door lock with Integrated Lock System 8 consists of Rotating Pawl Latch 8 and at least one Door Knob. A Rod Latch 8 is required for the rod for both the upper and lower ends of the door.