Pivot Bearing Set D30-28.5 M8

Responds to the smallest changes! Compact and robust Pivot Bearing Set D30-28.5 M8 ensures that even light transported goods can actuate and trigger mechanisms. The pivot bearing is fastened to the end face of a (profile) tube using a Threaded Insert and is also connected to a Fastener D30. This ensures the profile can be rotated around its longitudinal axis. The Pivot Bearing Set comprises a fixed and a floating bearing with 2 mm of length compensation. This ensures axial loads can be accommodated and compensates for any expansion in the shaft caused by heat – all without compromising precision. The ball-bearing mounted pivot bearing is easy running and exhibits low friction. If only one bearing position is required or if very high loads occur, it is advisable to use Double Pivot Bearing Unit D30-28.5 M8. This features two ball bearings. Consequently, it can accommodate higher forces for rotating motions. As a fixed bearing, Double Pivot Bearing Unit D30 doesn’t offer any play under axial load. Note: To build structures that allow both rotation and movement along an axis, use item Plain Bearings D40/D30.

Use the relevant M8 Threaded Insert to create a fixing with the end-face of a D30 profile.

Profile length L 1 varies depending on the profile and Threaded Insert used. Both bearing units of Pivot Bearing Set D30-28.5 M8 are fastened at the ends of the profile. Loading values F correspond to those of Profile Tube D30.