| Set CAD-format |
|---|
Preview
Slide Profile LRF 8 D14 160×28, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quote
Tootekood: 0.0.655.95
Kategooriad: Line 8 bed plate profiles, Carriages and carriage sets, Carriages and carriage sets
Silt: Meter
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Cross-sectional area | A = 35.13 cm2 |
| Moment of Inertia, x-axis | Ix = 21.8 cm4 |
| Moment of Inertia, y-axis | Iy = 777.78 cm4 |
| Weight | m = 9.49 kg/m |
| Delivery unit | cut-off max. 3000 mm |
| Material | Al, anodized |
| Permissible groove extraction force | F = 5000 N |
| Colour | natural |
Slide Profile LRF 8 has two special features that make it easier to build customised units. The upper surface is milled flat and offers a great deal of space for incorporating application-specific fastenings. Installation, maintenance and application changeovers take just minutes. The underside of the Slide Profile features a Line 8 groove as well as special grooves to accommodate Adjuster Profile 8, to which the Slide Set LRF 8 is fastened. Two threaded bores need to be machined on one side to enable adjustment of the rollers. An indentation makes precise placement easier. One of the special grooves for the Adjuster Profile is wider than the other in order that the rollers can be adjusted via a grub screw so as to eliminate play. Note: Please observe the recommended tightening torques (in the installation guide provided).
Machining requirements when using Slide Profiles LRF 8 in customised lengths. The indentations at the side offer a good point of orientation. The Slide Profiles allow users to locate mounting bores at will. The positioning collars can be used as necessary.