| Set CAD-format | ||
|---|---|---|
| Synchroniser Shaft Cover Set KLE 6 60×60 | CADPDFRFQ |
Preview
Synchroniser Shaft Cover Set KLE 6 60×60
2 Synchroniser Adapter Plates KLE 6 60×60, Al 4 Hexagon Socket Head Cap Screws DIN 912-M5x16, St, bright zinc-plated 4 Washers DIN 433 5.3, St, bright zinc-plated 4 Countersunk Screws DIN 7991-M4x8, St, bright zinc-plated
Scope of Delivery
2 Synchroniser Adapter Plates KLE 6 60x60, Al 4 Hexagon Socket Head Cap Screws DIN 912-M5x16, St, bright zinc-plated 4 Washers DIN 433 5.3, St, bright zinc-plated 4 Countersunk Screws DIN 7991-M4x8, St, bright zinc-plated
Properties
| line 6 | line 6 |
|---|---|
| ESD-safe | No |
| Weight | m = 300 g |
| Delivery unit | 1 set |
Where added safety is required, a protective housing consisting of conduit elements and a Synchroniser Shaft Cover Set can be constructed over the Synchroniser Shaft.
The conduit elements are fixed in place between the two timing-belt drives of Linear Units KLE using the adapter plates in the Synchroniser Shaft Cover Set. Linear Unit KLE 6 60x60: Conduit Profile U 60x60 E (7.0.002.91) Lid Profile D60 E (7.0.002.87) c = a - 24.5 mm (adapter plate thickness = 12 mm) Linear Unit KLE 8 80x80: Conduit Profile U 80x80 E (7.0.002.74) Lid Profile D80 E (7.0.002.73) c = a - 32.5 mm (adapter plate thickness = 16 mm) a = Distance between Linear Units c = Length of conduit elements The Conduit Profiles must be provided with DIN 74-Af4 countersinks for their fixings.