T-Slot Slider 8 for Corner-Fastener 8 32×18, grey similar to RAL 7042

A small addition with a big impact! T-Slot Slider 8 for Corner-Fastener 8 32x18 is the key to building space-saving folding doors. No special profiles are required. The T-Slot Slider uses the available Line 8 system groove as a guide and the tried-and-tested item door solution based on Clamp Profiles 8 32x18. With just a few components, you can build an inexpensive folding door that can be fitted very quickly. The slim Clamp Profiles 8 32x18 (0.0.373.67) provide a secure hold for the central panel element. Meanwhile, the T-Slot Slider hinge insert – which features a spring-mounted guide pin – is pressed into Corner-Fastening Set Clamp-Profile 8 32x18 (0.0.494.73). The plastic slider is inserted into the groove of the frame, then the pin protruding from the corner fastener is introduced into the slider so that the spring-mounted mechanism clips into place in an indentation. This produces a secure, rotating locking arrangement without requiring any additional screw attachment. Cap for Corner-Fastener 8 32x18 in grey (0.0.494.71) can be clipped into place, if required. Folding door Hinge Al for Clamp Profile 8 32x18 (0.0.666.92) is used to connect together door segments. Two T-Slot Sliders are needed for each folding door, one of which is installed in the upper groove of the door frame while the other is fitted to the groove at the bottom. The low-friction plastic of the T-Slot Slider does not need to be lubricated and does not require any separate maintenance.

Assembly sequence 1. Introduce the hinge insert into Corner-Fastening Set Clamp-Profile 8 32x18 (0.0.494.73). 2. Fit the T-Slot Slider into the groove of the frame. 3. Clip the guide pin of the hinge insert into the T-Slot Slider.

Folding doors made using item Clamp Profiles consist of two segments. The overall area of the doors should not exceed 2 m² for weight reasons. Please observe clearances when calculating lengths.

How to calculate the length (L 1 ) of the vertical frame profile on the folding door in relation to the overall height (H) of the door frame.

How to calculate the length (L 2 ) of the horizontal frame profiles on the folding door in relation to the overall width of the door frame. The recommended clearances are factored in.

Straightforward removal using a screwdriver.