| Set CAD-format |
|---|
Preview
Roller Conveyor 6 80×40 E D30
Castor Rail 6 80×40 E, Al, bright Roller Inserts D30-63, PA
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteScope of Delivery
Castor Rail 6 80x40 E, Al, bright Roller Inserts D30-63, PA
Properties
| Line | Line D30 |
|---|---|
| ESD-safe | No |
| Weight | m = 2.25 kg/m |
| Delivery unit | cut-off max. 6000 mm |
All the benefits of Roller Conveyor 6 E – just in double the width. The larger contact surface on Roller Conveyor 6 80x40 E D30 offers additional support for goods with uneven or soft bases. It is ideal when using small load carriers with honeycombed bases or cardboard containers. Roller Conveyor 6 80x40 E D30 is supplied pre-configured with D30 roller elements and in the desired length. Simply unpack and install! Replacing roller elements is easy, as no tools are required and none of the surrounding roller elements need to be removed. Aluminium Roller Conveyor 6 40x40 E Guide Rails are used as a safe means of keeping the transported goods on track. They are simply pushed into the groove on the side of the Castor Rail profile, which also increases the rigidity of the conveyor line. Slide Strips made of PE-HD can then be fitted to protect against scratches. They are clipped onto the Guide Rails. Two Line 6 profile grooves on the underside are used to fasten the conveyor to a frame and make it easier to fit panel elements that shield roller conveyors underneath from dirt and dust. Roller Conveyor 6 80x40 E D30 boasts very good load-carrying capacity over long stretches and excellent rigidity – including when exposed to sideways bending. This means that, in most cases, there is no need for additional support. Roller Conveyor 6 80x40 E D30 is also available in an ESD-safe version. Note: Roller Conveyor 6 40x40 E D30 is available as a narrower variant in a width of 40 mm.
Permissible force on a single roller element of Roller Conveyor 6 40x40 E D30: F < 100 N
Roller Conveyor 6 80x40 E D30
Roller Conveyor 6 80x40 E D30 with Guide Rails (increased bending strength)
The relevant statutory regulations, such as DGUV standards in Germany, must be adhered to when building racks. Please note that the load-carrying capacity of item Roller Conveyors can exceed the capacity of other components. The maximum deflection (f) item recommends for two parallel Roller Conveyors is: f < 1/100 a
Important: The load limits of adjacent components in the construction must be taken into account.
