| Set CAD-format |
|---|
Preview
Tube D30, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteProperties
| Line | Line D30 |
|---|---|
| ESD-safe | Yes |
| Cross-sectional area | A = 1.26 cm2 |
| Moment of Inertia, torsional | It = 2.44 cm4 |
| Moment of Inertia, x-axis | Ix = 1.29 cm4 |
| Moment of Inertia, y-axis | Iy = 1.29 cm4 |
| Weight | m = 0.341 kg/m |
| Delivery unit | cut-off max. 6000 mm |
| Material | Al, anodized |
| Colour | natural |
Caps for the ends of Profiles and Tubes are available in two variants – grey and a black, electrostatically dissipative version. This makes it easy to identify the intended application of a Cap.
Permissible loads for profile designs
Permissible loads for constructions built with Tube D30. The diagram shows the permitted load in relation to support span a. It is based on the maximum permissible deflection set by item, which is 1/100 of the support span. When designing rack structures, please observe the limit values set out in the relevant statutory regulations (e.g. DGUV regulation 108-007 in Germany).