| Set CAD-format |
|---|
Preview
Profile 6 D30 2NO90, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteProperties
| Line | Line D30 |
|---|---|
| line 6 | line 6 |
| ESD-safe | Yes |
| Cross-sectional area | A = 2.88 cm2 |
| Moment of Inertia, torsional | It = 0.98 cm4 |
| Moment of Inertia, x-axis | Ix = 1.79 cm4 |
| Moment of Inertia, y-axis | Iy = 1.79 cm4 |
| Weight | m = 0.78 kg/m |
| Delivery unit | cut-off max. 6000 mm |
| Material | Al, anodized |
The all-rounder among the cylindrical profiles: Profile 6 D30 combines the strengths of a profile tube with those of a classic MB profile. It features four Line 6 grooves that can be used to connect accessories with T-Slot Nuts, and the core bore can be used for end-face connections. Fastener D30 attaches to the profile contour between the grooves and can also be affixed to the end face. Profile 6 D30 can be ordered with up to four closed grooves to suit the relevant application. This produces constructions that are easy to clean, while a closed groove can also be opened up as required. Profile 6 D30 can be combined with Tube D30 and Profile Tube D30 without any difficulty. Note: Use Profile Tube 8 D30 (0.0.663.94) to connect accessories designed for a Line 8 groove.
Caps for the ends of Profiles and Tubes are available in two variants – grey and a black, electrostatically dissipative version. This makes it easy to identify the intended application of a Cap.
Any covered grooves on a profile can be opened up as and when required. The opened-up section of the groove can be used in the usual way to fasten accessories or panel elements.
Permissible loads for profile designs
The diagram shows the permitted load in relation to support span a. It is based on the maximum permissible deflection set by item, which is 1/100 of the support span. When designing rack structures, please observe the limit values set out in the relevant statutory regulations (e.g. DGUV regulation 108-007 in Germany).