| Set CAD-format | ||
|---|---|---|
| Pneumatic Connecting Set 8 160×40 G1/2 | CADPDFRFQ |
Preview
Pneumatic Connecting Set 8 160×40 G1/2
Pneumatic connecting plate 8, Al, white aluminium similar to RAL 9006 O-ring 25×2.5, NBR, black 2 Hexagon Socket Head Cap Screws DIN 912-M8x18, St, bright zinc-plated 2 T-Slot Nuts V 8 St M8, bright zinc-plated Drill template Notes on Use and Installation
Scope of Delivery
Pneumatic connecting plate 8, Al, white aluminium similar to RAL 9006 O-ring 25x2.5, NBR, black 2 Hexagon Socket Head Cap Screws DIN 912-M8x18, St, bright zinc-plated 2 T-Slot Nuts V 8 St M8, bright zinc-plated Drill template Notes on Use and Installation
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 283 g |
| Delivery unit | 1 set |
Working under pressure – not a problem with the item installation profiles and Pneumatic Connecting Sets 8 G1/2. The G1/2" threaded bore to ISO 228-1 accommodates standard compressed air couplings. The connecting plate is fitted to the side of the Installation Column Profile, at any height. A hole also has to be drilled through to the integrated compressed air duct in the Installation Column Profile. The corresponding drill template is included in the scope of supply.
To help make the necessary through hole, the Pneumatic Connecting Set includes a drill template that is also used to cover over the edge of the through hole. First, position the drill template in the desired position, with the flat side down. Next, use the pneumatic connecting plate, along with the enclosed Hexagon Socket Head Cap Screws and T-Slot Nuts to hold the template securely on the profile.
Using a ⌀ 10.0 mm metal spiral drill, drill a through hole into the compressed air conduit through the drill template.
Once the hole has been drilled, remove the pneumatic connecting plate and drill template. Next, enlarge the through hole with a ⌀ 12.7 mm metal spiral drill.