| Set CAD-format | ||
|---|---|---|
| Bevel Gearbox WG 180° | CADPDFRFQ |
Preview
Bevel Gearbox WG 180°
Box, box lid and Bearing Blocks, Al, anodized, black Straight-toothed ball-bearing bevel gear pairs, made of high strength steel with minimal backlash and wear-resistant surface Prelubricated, maintenance-free Gear ratio i = 1 : 1 Nominal torque M nom = 10 Nm Nominal speed n nom = 400 min -1 Nominal power P nom = 0.419 kW Torque M max. = 28 Nm Speed n max. = 1000 min -1 Power P max. = 1.173 kW Service life L = 10,000 h Play angle a max. = 20 ’
Scope of Delivery
Box, box lid and Bearing Blocks, Al, anodized, black Straight-toothed ball-bearing bevel gear pairs, made of high strength steel with minimal backlash and wear-resistant surface Prelubricated, maintenance-free Gear ratio i = 1 : 1 Nominal torque M nom = 10 Nm Nominal speed n nom = 400 min -1 Nominal power P nom = 0.419 kW Torque M max. = 28 Nm Speed n max. = 1000 min -1 Power P max. = 1.173 kW Service life L = 10,000 h Play angle a max. = 20 ’
Properties
| line 8 | line 8 |
|---|---|
| Torque max. | Mmax. = 28 Nm |
| Torque, rated | Mnom. = 10 Nm |
| Speed max. | nmax. = 1000 min-1 |
| Speed, rated | nnom. = 400 min-1 |
| ESD-safe | No |
| Weight | m = 2.65 kg |
| Power, max | Pmax. = 1.173 kW |
| Power, rated | Pnom. = 0.419 kW |
| Delivery unit | 1 pce. |
The diagram is used for calculating the permissible torques M and speeds n of the Bevel Gearboxes. For loads in the continuous rated zone, continuous operation is permissible. In the intermittent rated zone, operating times must be reduced accordingly.
The Bevel Gearboxes with special kinematics and the ability to combine several Bevel Gearboxes allows flexible positioning of drives and linear units.
The geometry for connecting multi-spline hub to Multi-Spline Shaft or solid shaft ⌀ 30 mm can be changed by using Connecting Shaft U-WG or the Adapter Shaft.
