| Set CAD-format | ||
|---|---|---|
| Hanger 6-8 | CADPDFRFQ |
Preview
Hanger 6-8
2 hangers, die-cast zinc, black 2 anti-torsion blocks, die-cast zinc, black Grub screw DIN 913-M5x10, black
Scope of Delivery
2 hangers, die-cast zinc, black 2 anti-torsion blocks, die-cast zinc, black Grub screw DIN 913-M5x10, black
Properties
| line 6 | line 6 |
|---|---|
| line 8 | line 8 |
| ESD-safe | No |
| Weight | m = 70 g |
| Force max | Fmax. = 400 N |
| Delivery unit | 1 set |
Compact hanger for especially rigid fastening of frame elements to Stand Profiles. Profiles from Lines 6 and 8 can be connected together as required. If required, the Hangers can be screwed together front and rear using the supplied grub screw in order to prevent lifting.
Hanger 6-8: rigid hanging of profiles from either Line 6 or 8. > clearance between frame profile and Stand Profile 12 mm > medium load-carrying capacity > concealed protection against removal > lateral tolerance adjustment 1 mm > may be mounted in such a way that a loose or missing screw results in the frame element slipping.
The two-sided anti-torsion blocks can be configured to suit various combinations of Profiles 6 and 8. Fastening to Profile 6 using Button-Head Screw ISO 7380-M6x14 and T-Slot Nut 6 St M6. Fastening to Profile 8 using Button-Head Screw ISO 7380-M6x16 and T-Slot Nut 8 St M6.
Hanger 6-8 allows two variations of frame assembly: 1. Very easy 1-man assembly: the frame element is lowered from above onto the hangers on the Stand Profiles, lugs on the hangers engaging to ensure stability. They are then secured by the grub screws provided. 2. The frame element is slid into the hanger on the Stand Profile from below and secured with the grub screw. Removal of the grub screws results in the frame element dropping down.
Attaching the Hanger from the front ensures that the frame and panel elements can be fitted without gaps.
Hanger 6-8 can be used to maintain very small gaps (12 mm) between the frame and the Stand Profile. F = approx. 400 N
