Synchronising Set KLE 8 80×80

2 Coupling Halves D55/D25, Al 2 Coupling Halves D55 KLE 8 80×80, Al 2 Coupling Inserts D55, PU, green Tightening torque, Coupling Halves D55 KLE 8 80×80, Al: 25 Nm Tightening torque, clamping hub screw: 9.6 Nm

Produktnr: 0.0.609.78 Kategorier: , Stikkord:
Set CAD-format
Synchronising Set KLE 8 80×80CADPDFRFQ

Preview

Scope of Delivery

2 Coupling Halves D55/D25, Al 2 Coupling Halves D55 KLE 8 80x80, Al 2 Coupling Inserts D55, PU, green Tightening torque, Coupling Halves D55 KLE 8 80x80, Al: 25 Nm Tightening torque, clamping hub screw: 9.6 Nm

Properties

line 8line 8
ESD-safeNo
Weightm = 715 g
Delivery unit1 set
To synchronise two Linear Units KLE, the corresponding Synchronising Sets are available. Each of these contains two complete couplings for connecting the Drive Unit pulleys. Note: When designing the drive for synchronised KLEs, the permissible drive torques of the components, in particular the coupling on the motor side, must be taken into account.
A suitable Tube St (sawn to length) turns the Synchronising Set into a complete synchroniser shaft.
The permissible speed of the Synchroniser Shaft depends on its length. n = Rotational speed of the Synchroniser Shaft a = Distance between Linear Units
Automation