| Set CAD-format | ||
|---|---|---|
| Rotating Pawl Latch 8 | CADPDFRFQ |
Preview
Rotating Pawl Latch 8
Pawl, die-cast zinc, bright zinc-plated 2 alternating stops, die-cast zinc, bright zinc-plated Crank, die-cast zinc, bright zinc-plated Connecting plate, St Glide bush, POM, black Cap Screw DIN 912-M3x5, St, bright zinc-plated Notes on Use and Installation
Scope of Delivery
Pawl, die-cast zinc, bright zinc-plated 2 alternating stops, die-cast zinc, bright zinc-plated Crank, die-cast zinc, bright zinc-plated Connecting plate, St Glide bush, POM, black Cap Screw DIN 912-M3x5, St, bright zinc-plated Notes on Use and Installation
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 50 g |
| Delivery unit | 1 set |
Ergonomically designed Door Knob for actuating Integrated Lock System 8 and serving as a handle for Rotating Pawl Latch 8. The lockable version uses a locking bar to prevent rotation of the Door Knob. The set includes the necessary fastening elements and two square pins for actuating the lock from one or both sides. If the door is to be opened from both sides, 2 Door Knob sets must be combined. The lockable Door Knob can only be actuated from one side.
Integrated Lock System 8 is a modular door lock for guards and enclosures. The various configurations using pawl latches or rods enable doors to be locked in up to three directions. The lock is fully integrated into Profile 8 or Profile 8 light (not clamp profiles) - the rotating pawl latch swings into the lateral profile groove and the rods are concealed in the profile core bore. The system can be operated from either one side or both sides of the door (i.e. inside/outside). There is also the option of locking the door from one side by using the lockable Door Knob.
A counterbore with a diameter of 30 mm must be drilled into the door profile for holding the Integrated Lock System. A commercially available counterbore drill (3-cutter with ⌀ 11 mm guide pin or larger) or Step Drill, Universal Connection 12 is required for this purpose. The ⌀ 30 mm counterbore must be 25 mm deep.
The basic version of the door lock with Integrated Lock System 8 consists of Rotating Pawl Latch 8 and at least one Door Knob. A Rod Latch 8 is required for the rod for both the upper and lower ends of the door.
Tube D6.3x1.6 5.5 A/F forms the connection between the Rotating Pawl Latch and the Rod Latch. The length l of the tube for actuating the Rod Latch is: l = a - 60 mm