Behandling af forbindelser
Profilbearbejdning til standard- eller universaltilslutninger. Boringernes og gevindets placering skal specificeres ved bestilling.
> Alle tjenester (som savsnit, profilbearbejdning, bearbejdning af aksler) kan kun bestilles i kombination med et produkt.
Underkategorier
Forbindelsesbehandling. endeflader
Gevind i kerneboringen på profiler til standardtilslutning.
Forbindelsesbehandling. borede huller
Adgangshul til værktøj ved bearbejdning af en standardforbindelse.
Forbindelsesbehandling. aftrappede boringer
Trinvis boring til universalbefæstelse.
Forbindelsesbehandling til klemmeprofiler
Profilbearbejdning til sammenkobling af klemmeprofiler. Hullernes placering skal specificeres ved bestilling.
Produkter
Viser 27 resultater
-
Profile Machining, End-Face Thread, M12x30
Varenr: 0.0.015.01 -
Profile Machining, Groove-Side Hole, 12, D11.5
Varenr: 0.0.015.02 -
Profile Machining, Groove-Side Stepped Bore, 12, D30x24
Varenr: 0.0.015.03 -
Profile Machining, End-Face Thread, M8x20
Varenr: 0.0.026.95 -
Profile Machining, Groove-Side Hole, 8, D7
Varenr: 0.0.026.96 -
Profile Machining, Groove-Side Stepped Bore, 8, D20x16
Varenr: 0.0.026.97 -
Profile Machining, Groove-Side Stepped Bore, 8, D15x12/D9
Varenr: 0.0.196.67 -
Profile Machining, End-Face Thread, M5x12.5
Varenr: 0.0.370.45 -
Profile Machining, Groove-Side Hole, 5, D4.3
Varenr: 0.0.370.51 -
Profile Machining, Groove-Side Stepped Bore, 5, D12x8.5
Varenr: 0.0.370.55 -
Profile Machining, Groove-Side Stepped Bore, 8, D20x5
Varenr: 0.0.373.17 -
Connection Processing, End Face, Thread M5x16
Varenr: 0.0.404.13 -
Profile Machining, End-Face Thread, M6x16
Varenr: 0.0.419.15 -
Profile Machining, Groove-Side Hole, 6, D5.5
Varenr: 0.0.419.16 -
Profile Machining, Groove-Side Stepped Bore, 6, D16x12.7
Varenr: 0.0.419.75 -
Profile Machining, Groove-Side Stepped Bore, 6, D11x9/D7
Varenr: 0.0.431.17 -
Connection Processing, Mitre-Fastener 8
Varenr: 0.0.494.12 -
Connection Processing Profile St, Drilled Hole D8
Varenr: 0.0.603.80 -
Profile Machining, Groove-Side Hole, DX St
Varenr: 0.0.603.81 -
Connection Processing, Central-Fastening Set 8
Varenr: 0.0.609.53 -
Connection Processing, Automatic-Fastening Set N
Varenr: 0.0.609.54 -
Connection Processing, Mitre-Fastener 6
Varenr: 0.0.631.11 -
Profile Machining, Groove-Side Hole, 10, D9
Varenr: 0.0.632.42 -
Profile Machining, End-Face Thread, M10x25
Varenr: 0.0.632.43 -
Profile Machining, Groove-Side Stepped Bore, 10, D25x20
Varenr: 0.0.632.44 -
Connection Processing, Central-Fastening Set 10
Varenr: 0.0.648.11 -
Connection Processing, Central-Fastening Set P 6
Varenr: 0.0.717.39
