| Set CAD-format | ||
|---|---|---|
| Tool Balancer 6-8 kg | CADPDFRFQ |
Preview
Tool Balancer 6-8 kg
Casing, die-cast Al Steel cable ⌀ 2.5 mm, St, stainless Arrester mechanism: Steel cable ⌀ 2 mm, St, stainless Steel cable clamp, St, bright zinc-plated Spring hook, St Hook wrench, St Notes on Use and Installation
Scope of Delivery
1 Casing, die-cast Al 1 Steel cable ⌀ 2.5 mm, St, stainless 1 Arrester mechanism: Steel cable ⌀ 2 mm, St, stainless 1 Steel cable clamp, St, bright zinc-plated 1 Spring hook, St 1 Hook wrench, St Notes on Use and Installation
Properties
| ESD-safe | No |
|---|---|
| Weight | m = 3.4 kg |
| Delivery unit | 1 set |
Out of the way, but close to hand! Tool Balancers from item ensure tools are at the right height for employees to reach. When not required, the Tool Balancer automatically removes the tool from the immediate working area, while the restoring force, which can be accurately balanced, noticeably alleviates the physical strain on staff. Employees can customise any of the Tool Balancers to their reaching height using a screw-adjusted stopper. Useful accessories include Runway Profile 8 40x40 (0.0.623.61), Tool Slide 40x40 (0.0.653.41) and Spring Hook 80 D8 (0.0.619.70).
To adjust the Tool Balancer for the maximum tensile load, use the tool included in the scope of supply, turning it anti-clockwise.
To adjust the Tool Balancer for the minimum tensile load, use the loop on the casing, turning it clockwise.
Installation example showing the Tool Balancer with Spring Hook 80 D8 (0.0.619.70), Tool Slide 40x40 (0.0.653.41) and Runway Profile 8 40x40 (0.0.623.61).