| Set CAD-format | ||
|---|---|---|
| T-Slot Slider 8 80×40 with Slide Clamp | CADPDFRFQ |
Preview
T-Slot Slider 8 80×40 with Slide Clamp
Slide, die-cast zinc, bright zinc-plated 2 slide elements, POM 2 nuts ISO 4035-M6, St, bright zinc-plated 1 special T-Slot Nut 8 St M6 heavy duty, bright zinc-plated 1 threaded stud DIN 913-M6x65, St, bright zinc-plated 1 threaded stud DIN 913-M6x45, St, bright zinc-plated 1 threaded stud DIN 913-M6x35, St, bright zinc-plated 1 clamp Lever M6-45 1 washer ISO 7093-1 – 6 – 200 HV, bright zinc-plated
Scope of Delivery
Slide, die-cast zinc, bright zinc-plated 2 slide elements, POM 2 nuts ISO 4035-M6, St, bright zinc-plated 1 special T-Slot Nut 8 St M6 heavy duty, bright zinc-plated 1 threaded stud DIN 913-M6x65, St, bright zinc-plated 1 threaded stud DIN 913-M6x45, St, bright zinc-plated 1 threaded stud DIN 913-M6x35, St, bright zinc-plated 1 clamp Lever M6-45 1 washer ISO 7093-1 - 6 - 200 HV, bright zinc-plated
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 145 g |
| Delivery unit | 1 set |
The logical development of the tried-and-tested T-Slot Slider 8 80x40. Low friction, low wear, exceptional versatility. The additional slide clamp attachment extends the range of possible applications, e.g. as an adjustable limit stop. No profile damage when moving the slide: slide elements for a smooth run. Holding force at maximum torque (15 Nm): 600 N.
Maximum length of threaded stud: l = a + 26.5 The slides must always be connected to the Profile 8 grooves using only the specially prepared Fastening Sets, part No 0.0.619.62. Note Stud M6x70 must be shortened to the appropriate length. It is advisable to use a chemical fixing agent to secure the screw in the clamp lever.