| Set CAD-format |
|---|
Preview
Profile X 8 80×40 2NO180 light, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quote
Tootekood: 0.0.719.92
Kategooriad: Line 8 construction profiles, MB Building Kit System, New Products 2023/II (autumn)
Silt: Meter
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | Yes |
| Cross-sectional area | A = 11.608 cm2 |
| Moment of Inertia, x-axis | Ix = 17.193 cm4 |
| Moment of Inertia, y-axis | Iy = 74.025 cm4 |
| Weight | m = 3.134 kg/m |
| Delivery unit | cut-off max. 6000 mm |
| Material | Al, anodized |
| Permissible groove extraction force | F = 2500 N |
| Colour | natural |
Profile X 8 80x40 2NO180 light is a universal construction profile made of high-quality anodized aluminium in the modular dimension of Line X 8. This weight-reduced aluminium profile in the light design variant from item features four open Line 8 profile grooves. The grooves on its two narrow sides are closed, but can easily be opened up. This aluminium profile can be used to build frames and cabins that have easy-to-clean unbroken outer surfaces.
All Line 8 profiles are mutually compatible, even if they exhibit special characteristics and properties. Profiles 8 feature rounded edges (R4). Profiles X 8 feature a minimal edge radius (R1) that ensures smooth transitions can be achieved between aluminium profiles. Profiles 8 XMS are based on the contour of Profiles X 8. They feature special grooves designed to accommodate lip seals and usually have an integrated cable conduit.
Line 8 profiles from item are available with closed grooves in a variety of arrangements. The profile wall can be opened up partially or completely so that the groove underneath can be used. The NO design variant indicates that the closed grooves are particularly easy to open up thanks to two notches on the underside of the outer surface. Automatic-Fastening Set 8 NO (0.0.489.96) is ideal for connecting profiles together. It requires only a minimal opening in the groove and comes with its own cap.
T-Slot Opener 8NO is used to remove the groove cover over any length beginning from the end face of the profile or any other opening of sufficient size. If the opening does not extend to the end of the profile, the end of the opening must be defined with a hole of ⌀ 9.2 mm.
Öffnung einer geschlossenen Profilnut 8: 1. Am Anfang und Ende der Öffnung eine Bohrung mit Durchmesser 9,2 mm einbringen 2. Verbleibende Nutabdeckung mit einem Schraubendreher aufhebeln 3. Kanten der Nutöffnung entgraten 4. Nutenstein oder andere Befestigungselemente in die Profilnut einschwenken Hinweis: Sollen größere Nutabschnitte geöffnet werden, wird die Verwendung des Nutöffners (0.0.612.88) empfohlen, um den Nutgrund nicht zu beschädigen.