| Set CAD-format |
|---|
Preview
Profile 8 160×160, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteProperties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Cross-sectional area | A = 74.2 cm2 |
| Moment of Inertia, torsional | It = 1876.66 cm4 |
| Moment of Inertia, x-axis | Ix = 2355 cm4 |
| Moment of Inertia, y-axis | Iy = 2355 cm4 |
| Weight | m = 20.04 kg/m |
| Delivery unit | cut-off max. 6000 mm |
| Material | Al, anodized |
| Permissible groove extraction force | F = 5000 N |
In view of the high stresses to which profiles may be subjected, it is always advisable to connect them using Angle Brackets 8 160x160 St. This profile has a different internal contour to the other construction profiles, which means that standard Fastener Sets 8 cannot be used for connection. Universal-Fastening Sets 8 St or Automatic-Fastening Sets 8 are recommended for connecting profiles subject to limited stresses.
In addition to the screw channels with a diameter of 6.8 mm, the large item construction profiles feature core holes with a diameter of 10 mm. These are suitable, for example, for an M12 tapped thread to secure the load-bearing base plate 8 320x320 St (0.0.476.70). Components subjected to lower loads can be attached to the screw channels using M8 screws.