Plastic 10mm, anthracite

Coloured coating on both sides, close to colour code RAL 7016 Thickness tolerance ± 8%

Configurated product data

Nothing generated yet

You must configurate your product below before requesting quote
Set CAD-format
0.0.720.12

Preview

Scope of Delivery

Coloured coating on both sides, close to colour code RAL 7016 Thickness tolerance ± 8%

Properties

ESD-safeNo
Weight, spec. Surfacem = 14.49 kg/m2
Delivery unitcut-off max. 2770x1820 mm
MaterialResin-bonded cellulose laminate
Colouranthracite
Plastic is a thermosetting material with very high abrasion and impact resistance. The panels in a thickness of 10 mm are laminated in the colour anthracite. They are suitable for panelling, table tops and partitions that are subjected to high stresses. Panels made of resin bonded cellulose laminate are also resistant to high temperatures. The data sheet sets out details relating to thermal expansion that must be taken into account when installing them in frame structures.
Plastic panels are available from item in various colours. Thanks to their hygienically sealed melamine resin surface, they exhibit especially good resistance to many chemicals. A full list can be found in the product data sheet. Important: Panel elements made of Plastic must be stored and transported lying flat until they are to be installed. Due to the production processes used, the brilliance and colour of laminated surfaces can differ slightly from the RAL colour stated.