Motor Fastening Set 8 40 D14 I, right

1 casing plate 8 40 I, St, bright zinc-plated 1 casing lid 8 40 I, right, PA, black 1 sprocket wheel set z10 d12, St 1 Chain 3/8″ 1×44, St 1 centre ring D37/D33, Al 1 motor adapter D80x27 I, Al 1 adapter shaft set D14 I, St 1 circlip DIN 472-38×1.5, St 1 circlip DIN 471-14×1, St 2 circlips DIN 471-12×1, St 4 Hexagon Socket Head Cap Screws DIN 912-M6x25, St, stainless 7 Hexagon Socket Head Cap Screws DIN 912-M6x20, St, stainless 8 washers ISO 7092-6-200 HV, St, bright zinc-plated

Tootekood: 0.0.731.07 Kategooriad: , Silt:
Määrake CAD-vorming
Motor Fastening Set 8 40 D14 I, rightCADPDFRFQ

Eelvaade

Scope of Delivery

1 casing plate 8 40 I, St, bright zinc-plated 1 casing lid 8 40 I, right, PA, black 1 sprocket wheel set z10 d12, St 1 Chain 3/8" 1x44, St 1 centre ring D37/D33, Al 1 motor adapter D80x27 I, Al 1 adapter shaft set D14 I, St 1 circlip DIN 472-38x1.5, St 1 circlip DIN 471-14x1, St 2 circlips DIN 471-12x1, St 4 Hexagon Socket Head Cap Screws DIN 912-M6x25, St, stainless 7 Hexagon Socket Head Cap Screws DIN 912-M6x20, St, stainless 8 washers ISO 7092-6-200 HV, St, bright zinc-plated

Properties

rida 8rida 8
LineConveyors
ESD-safeJah
Kaalm = 1.42 kg
Delivery unit1 set
Motor Fastening Set 8 40 D14 I, right connects an item Bevel Gearbox D14/D11 and Motor AC D11-180W to a conveyor belt with the item indirect drive. Drive Unit Set 8 40 (0.0.702.72) is used to fit the fastening set to the conveyor belt on the right-hand side in the direction of travel. When using the indirect drive from item, the motor is located underneath the conveyor line. This enables you to build narrow conveyor lines that don’t have any contours protruding up into the transport level or to the side of the conveyor.
The motor fastening set for the item indirect drive transmits torque from the motor via a chain and two sprocket wheels to the drive pulley. The chain and sprocket wheels must be checked regularly for wear. When necessary, they should be replaced using Chain 3/8" 1x44 (0.0.730.94) and Sprocket Wheel Set z10 d12 (0.0.730.99).
The chain is supplied ready-lubricated and with wear and corrosion protection. To guarantee durability, it is advisable to regularly lubricate the chain with standard chain lubricants. It is advisable to lubricate the chain after 100 hours of use and thereafter at regular intervals of 500 hours. Before applying new lubricant, use a clean cloth to remove old lubricant.