| Set CAD-format | ||
|---|---|---|
| Bearing Flange Set 8 D30 120×30 M8 | CADPDFRFQ |
Preview
Bearing Flange Set 8 D30 120×30 M8
2 Laschen 120×30 D19, Al 2 Rillenkugellager DIN 625, St, verzinkt 2 Bolzen D6-9,5 M8x20, St, verzinkt 4 Zylinderschrauben DIN 912-M6x20, St, verzinkt 4 Nutensteine V 8 St M6, St, verzinkt
Scope of Delivery
2 flat brackets 120x30 D19, Al 2 deep groove ball bearings DIN 625, St, bright zinc-plated 2 bolts D6-9.5 M8x20, St, bright zinc-plated 4 Hexagon Socket Head Cap Screws DIN 912-M6x20, St, bright zinc-plated 4 T-Slot Nuts V 8 St M6, St, bright zinc-plated
Properties
| Line | Line D30 |
|---|---|
| ESD-safe | Yes |
| Weight | m = 281 g |
| Delivery unit | 1 set |
Bearing Flange Set 8 D30 120x30 M8 is used to install a Profile Tube D30 on a rotating bearing. The Profile Tube is fitted between the two centric, ball-bearing mounted screws. The flat brackets are screwed into a Line 8 groove. The chamfer on the flat bracket ensures that a Fastener D30 can still be fastened to the adjoining profile flank of a Profile 8 D30.
Together, the Bearing Flange Set, Sprocket Wheel z16 D34 (0.0.714.48) and Adapter Sleeve D30-43 M35 (0.0.714.50) create a synchronisation shaft for transmitting a motion to other functional units in Karakuri/LCA applications.
Chain 1/2" (0.0.465.17) is an alternative to a cable for Karakuri/LCA applications It is connected to a profile using Chain Fastener 1/2" M6-50 (0.0.708.59). It can be redirected using Pulley D75/D55 (0.0.708.62) and Chain Connector 1/2" 90° (0.0.708.60). Sprocket Wheel z16 D34 (0.0.714.48) is used to transmit forces, and is fitted in place on a Profile Tube D30 heavy duty using Adapter Sleeve D30-43 M35 (0.0.714.50). The Profile Tube itself is fitted to a frame using Bearing Flange Set 8 D30 120x30 (0.0.715.23), which ensures it can rotate freely.