| Set CAD-format | ||
|---|---|---|
| Chain Reverse Unit 8 80 VK14 | CADPDFRFQ |
Preview
Chain Reverse Unit 8 80 VK14
Chain Reverse Unit, die-cast zinc, black, pre-assembled Ball-bearing sprocket wheel, z = 16 (z = number of teeth) One revolution corresponds to 203.2 mm effective radius r w = 32.3 mm Hub with multi-spline DIN ISO 14-6x11x14 Hub depth 30 mm, Max. load: M D = 20 Nm Tensioning Block, die-cast zinc, black, pre-assembled Fastening screws, St, black, 2 caps, PA, black Chain length in Reverse Unit 236.3 mm Notes on Use and Installation
Tootekood: 0.0.463.37
Kategooriad: Chain drive components, Chain drive components, Chain conveyor system
Silt: Static
Scope of Delivery
Chain Reverse Unit, die-cast zinc, black, pre-assembled Ball-bearing sprocket wheel, z = 16 (z = number of teeth) One revolution corresponds to 203.2 mm effective radius r w = 32.3 mm Hub with multi-spline DIN ISO 14-6x11x14 Hub depth 30 mm, Max. load: M D = 20 Nm Tensioning Block, die-cast zinc, black, pre-assembled Fastening screws, St, black, 2 caps, PA, black Chain length in Reverse Unit 236.3 mm Notes on Use and Installation
Properties
| line 8 | line 8 |
|---|---|
| Torque max. | Mmax. = 20 Nm |
| ESD-safe | No |
| Weight | m = 1.1 kg |
| Delivery unit | 1 pce. |
Chain Reverse Units 8 80 are used for reversing, clamping and driving Chain ½". They are screwed into the end faces of Profiles 8 at a height of 80 mm .
It is possible to fit motors and couplings D55 directly to the Chain Reverse Unit.
The Chain Reverse Unit incorporates integrated chain tensioning block and clamp. The Chain tensioning distance is 2x13 mm in total. The Chain tension must be set so that the Chain can also be operated with the slack side of the Chain only slightly pre-tensioned.
The Chain can be driven directly using the Chain Reverse Units or the Chain Counter-Reverse Unit. The sprocket wheels of the Chain Reverse Units are available with multi-spline hub VK14 or with a bore that can be machined as required. Use of multi-spline hub VK14 enables the modular accessories (Synchroniser Shafts) to be used without any restrictions.
The Chain Reverse Units are screw-connected into the core bores in the end faces of the frame profiles. The Chain Guide Profile must be cut 50 mm longer than the aluminium profile, since it must project 25 mm into the Reverse Unit at each end.
