| Set CAD-format |
|---|
Preview
Shaft-Clamp Profile 8 D14, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteProperties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Cross-sectional area | A = 1.36 cm2 |
| Weight | m = 0.36 kg/m |
| Delivery unit | cut-off max. 3000 mm |
| Material | Al, anodized |
| Colour | natural |
Shaft-Clamp Profile 8 D14is used for securing Shaft D14 to the groove of a Line 8 Profile. After pressing the Shaft-Clamp Profile into the profile groove, the Shaft is then pressed in. Shafts D14 must be fixed in position at the chosen location using a dowel DIN 6325, one per length of shaft. Shaft-Clamp Profiles must not be used on profile grooves of types "light" and "E", because sufficient clamping will not be achieved.
