| Set CAD-format | ||
|---|---|---|
| Angle Fastener 8 40×40-45° | CADPDFRFQ |
Preview
Angle Fastener 8 40×40-45°
Angle Fastener 8 Zn, die-cast zinc, RAL 9006, white aluminium 2 Button-Head Screws ISO 7380-M8x18, St, bright zinc-plated 2 washers ISO 7089 – 8 – 200 HV, bright zinc-plated T-Slot Nut 8 St M8, bright zinc-plated
Scope of Delivery
Angle Fastener 8 Zn, die-cast zinc, RAL 9006, white aluminium 2 Button-Head Screws ISO 7380-M8x18, St, bright zinc-plated 2 washers ISO 7089 - 8 - 200 HV, bright zinc-plated T-Slot Nut 8 St M8, bright zinc-plated
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 180 g |
| Delivery unit | 1 set |
| Material | Die-cast zinc, white aluminium similar to RAL 9006 |
The fast route to a stronger hold! Angle Fastener 8 40x40-45° enables you to build supporting braces at a 45° angle in next to no time. Simply screw an Angle Fastener into the core bore at the end face of any Profile 8 40x40, fasten it to the frame and that’s it – job done! Retrofitting is also an option and the profiles do not need to be mitred. Angle Fastener 8 40x40-45° can also be used to build a whole truss.
Maximum loading: F 1 = 1000 N F 2 = 2000 N M = 50 Nm
Calculating strut length L: a = 48.1 mm b = 8.1 mm c = 55.6 mm
