| Set CAD-format | ||
|---|---|---|
| Conveyor Roller TRA50 (Chain-Driven), Bearing Block Set | CADPDFRFQ |
Preview
Conveyor Roller TRA50 (Chain-Driven), Bearing Block Set
2 Bearing Blocks, PA, black Fixed bearing cover, PA, black Floating bearing cover, PA, black 2 Button-Head Screws ISO 7380-M8x25, St, bright zinc-pl. 2 washers DIN 433-8.4, St, bright zinc-pl.
Scope of Delivery
2 Bearing Blocks, PA, black Fixed bearing cover, PA, black Floating bearing cover, PA, black 2 Button-Head Screws ISO 7380-M8x25, St, bright zinc-pl. 2 washers DIN 433-8.4, St, bright zinc-pl.
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 152 g |
| Force max | Fmax. = 1000 N |
| Delivery unit | 1 set |
A simple ratchet mechanism is used to insert the Conveyor Rollers into the Bearing Blocks mounted on the frame profile. The Bearing Block Set comprises a fixed and a floating bearing. The fixed bearing must be positioned on the drive side of the Conveyor Roller. When fitting the Bearing Blocks onto the frame profile, this is best done using a screw connection with Groove Profile 8 Al M8-40 (0.0.427.72), since this provides an easy means of ensuring consistent axle spacing. After fitting, the bearing blocks are covered by the Housing Profile, which stretches along the entire length of the roller conveyor. The design of the Housing Profile with Side Guide ensures that transported goods are kept on track and the side guide itself incorporates a Line 5 groove that enables users to attach a Slide Strip 5 or other guide element.
The housing of the Chain Reverse Unit is prepared for securing a Bearing Block. This Conveyor Roller is not driven via the chain. If required, the last Conveyor Roller can also be driven from the last driven roller by means of a ø 4 mm round belt.
