Telescope Profile 8 80×40, natural

Telescope 8 80x40 is a heavy-duty strut of adjustable length. It is particularly suitable for adjusting the height or inclination of equipment. The adjustable plain bearings and extended support width also enable this telescope to be used for constructing length-adjustable table legs. Telescope Profile 8 80x40 supports and guides the inside profile. The outer profile can be connected directly to a profile groove via its end face or using fastening elements (e.g. Hinge 8 80x40, heavy duty). Telescope Inner Profile 8 80x40 mounted in a sliding bearing is either secured with Telescope Securing Set 8 80x40 at the desired height or is located via predrilled holes using Telescope Locking Plunger 8 80x40.

Telescope Inner Profile 8 80x40 (length B) must be 20 mm shorter than Telescope Profile 8 80x40 (length A) in order that it can be inserted completely in the assembled telescope, and stroke H thereby maximised. L min. = A + 20 mm L max. = L min. + H B ≥ H x 1.2 ^ B ≥ H + 60 mm B ≤ A - 20 mm Max. load in telescope direction: 750 N

Telescope Connection Set 8 80x40 contains all components required for connecting Telescope Profile 8 80x40 and for constructing a telescope: a = Telescope Connecting Plate 8 80x40 b = Telescope Cap 8 80x40 c = Telescope Sliding Cap 8 80x40 Telescope Connecting Plate 8 80x40 is screwed to the Telescope Profile and offers various possibilities for fastening to a connecting structure.

To secure the telescope cap (with Telescope Profile 8 80x40) and telescope sliding cap (with Telescope Inner Profile 8 80x40), the Telescope Connection Set is provided with self-tapping screws DIN 7500.

After assembly of the two telescope profiles, the plain bearings of the Telescope Sliding Cap and Telescope Cap are adjusted free of play using screws M2.5x30 (1.5 A/F).

Telescope Connecting Plate 8 80x40 offers various possibilities for attaching the inside profile to a connecting structure. It is used for screw connection with Line 8 components or other parts. Suitable through holes and countersinks are provided in the Connecting Plate for this purpose.

Function of the holes in the Telescope Connecting Plate: d = Securing to Telescope Profile 8 80x40 using screws M6x22 e = Securing to Telescope Inner Profile 8 80x40 using screws DIN 7984-M5x20 f = Through hole ⌀ 6.3 for adapting other products to the Telescope Inner Profile 8 80x40 g = Through hole ⌀ 8.5 for adapting other products to the Telescope Profile 8 80x40 by press-fitting an M8 nut

On request, your local item partner can provide the Telescope Profiles machined ready for use with the Telescope Securing Set or Telescope Locking Plunger.

For lateral connection of Telescope Profiles 8 80x40, it is advisable to tap M6 threads in the area of the central rib and to use Automatic-Fastening Sets 8.