| Set CAD-format | ||
|---|---|---|
| Timing-Belt Reverse Unit GSF 8 40 R10 | CADPDFRFQ |
Preview
Timing-Belt Reverse Unit GSF 8 40 R10
Timing-Belt Reverse Unit Al, natural Tensioning device Length of Timing Belt inside the Timing-Belt Reverse Unit: 115 mm Button-Head Screw ISO 7380-M8x18, St, bright zinc-plated Retaining bracket, St, stainless 2 Hexagon Socket Head Cap Screws DIN 7984-M4x6, St, bright zinc-plated Installation guide
Scope of Delivery
Timing-Belt Reverse Unit Al, natural Tensioning device Length of Timing Belt inside the Timing-Belt Reverse Unit: 115 mm Button-Head Screw ISO 7380-M8x18, St, bright zinc-plated Retaining bracket, St, stainless 2 Hexagon Socket Head Cap Screws DIN 7984-M4x6, St, bright zinc-plated Installation guide
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 404.3 g |
| Delivery unit | 1 set |
It’s so small and yet it’s a complete timing-belt drive! All the components fit together to make a compact solution. The tensioning device for the Timing Belt is integrated into the Reverse Unit. The ball-bearing mounted pulleys ensure that everything runs smoothly. When used with Slide Set GSF 8 80x40, it creates a Linear Unit made up of just a few components. Drive Set GSF 8 40 is used to connect to the motor. Drive Unit and Timing-Belt Reverse Unit GSF 8 40 R10 can be used with a wide range of Line 8 profiles that are 40 mm in height as a guide. These profiles must have one Line 8 groove for the T-slot slider and another Line 8 groove opposite, through which the timing belt can be returned. The Drive Unit and Reverse Unit are fixed in place in the core bore of the profile, which has to be tapped with an M8 thread.
1 Drive Unit GSF 8 40 R10 2 Profile X 8 40x40 1N 3 Timing Belt R10 T5 4 Carriage plate* 5 Sliding shoe* 6 Slide* 7 Timing-Belt Reverse Unit GSF 8 40 R10 *(4, 5, 6 = Slide Set GSF 8 80x40) Belt length L= 2 x l + 210 mm