| Set CAD-format | ||
|---|---|---|
| Roller Conveyor 6 Al Fastening Bracket U D30 | CADPDFRFQ |
Preview
Roller Conveyor 6 Al Fastening Bracket U D30
Fastening Bracket, St, bright zinc-plated 2 Button-Head Screws, self-tapping 3.9×16, TX20, St, bright zinc-plated Hexagon Socket Head Cap Screw DIN 6912 M6x12, St, bright zinc-plated Washer ISO 7093-1-6-200 HV, St, bright zinc-plated T-Slot Nut 6 St M6, St, bright zinc-plated
Scope of Delivery
Fastening Bracket, St, bright zinc-plated 2 Button-Head Screws, self-tapping 3.9x16, TX20, St, bright zinc-plated Hexagon Socket Head Cap Screw DIN 6912 M6x12, St, bright zinc-plated Washer ISO 7093-1-6-200 HV, St, bright zinc-plated T-Slot Nut 6 St M6, St, bright zinc-plated
Properties
| Line | Line D30 |
|---|---|
| ESD-safe | Yes |
| Weight | m = 130 g |
| Delivery unit | 1 set |
Roller Conveyor 6 40x40 Al Fastening Brackets U D30 and I D30 are used to join two conveyor lines (even when they are at different angles). The hooks of the Fastening Brackets are arranged asymmetrically so they can be fitted to the same crossmember, thereby lining up roller conveyors flush with each other. Roller Conveyor 6 Al Fastening Brackets U D30 and I D30 can be used for the same purpose. These don’t have any side plates, which means a Guide Rail can be run right up to the transition point, because the side indentations are not covered over.
Roller Conveyor Al 80x40 Fastening Brackets U D30 and I D30 can be used with both versions of Roller Conveyor 6. In the case of Roller Conveyor 6 80x40 E D30, two brackets are fitted to the grooves on the underside while only one is attached to the narrower Roller Conveyor 6 40x40 E D30.
