Panel-klemmelist 8 2-4mm, grå tilsvarende RAL 7042

Panel-Clamping Strips are ideal for retrofitting panel elements (primarily made of Acrylic Glass, PET-G or Polycarbonate) into an assembled profile frame. Apart from straight saw cuts, no further machining of the panel element or Panel-Clamping Strips is required.

Panel-Clamping Strips consist of two components. The first of these, an aluminium strip (0.0.615.01), locates into the profile groove and holds the panel element in place. A second strip, of flexible plastic, is then used to secure both the panel element and the aluminium strip in the groove. If necessary, the plastic strip can be levered out in order to remove the panel element from the frame. The Panel-Clamping Strips 6 secure the panel element so that there is an offset of 1.6 mm to the outer edge of the profile. This produces a smooth outer wall for protective enclosures and helps reduce turbulence caused by air flows. The choice of Panel-Clamping Strip depends on the thickness of the panel element (s) and the particular Line: Line 6: s = 2 - 4 / 4 - 6 mm