Multiblock 5 PA, black

Multiblock PA is inserted into the profile groove at any position. Light cladding panels and panel elements made from Acrylic Glass, Plastic or Compound Material must be provided with a bore at the appropriate location and screwed to the Multiblock. Multiblock PA has two mounting locations plus a height adjuster which combine to give four offset positions from the edge of the profile. This allows different distances to be set to the edge of the profile so that panel elements of varying thicknesses can be screwed on flush. The panels are secured by screw connection with the square nut inserted in the Multiblock. This nut can be moved within a slot, a fact that allows a considerable degree of tolerance for the position of the bores in the panel element.

Twisting the Multiblock PA into the profile groove. The Multiblocks can be moved within the groove in order to align them with the bore in the panel element.

The contact face can be varied thanks to two different mounting orientations and the movable height adjuster.

Recommendation for mounting the panel element and permissible loading forces for Multiblocks PA.

Possible offset distances between the mounting locations and the edge of the profile.

The length of the fastening screw depends on the thickness of the panel element and use of the height adjuster.