| Set CAD-format | ||
|---|---|---|
| Catch Mounting Bracket, black | CADPDFRFQ |
Preview
Catch Mounting Bracket, black
Properties
| line 5 | line 5 |
|---|---|
| line 6 | line 6 |
| line 8 | line 8 |
| ESD-safe | No |
| Weight | m = 88 g |
| Delivery unit | 1 pce. |
| Material | St |
| Colour | black |
The Catch Mounting Bracket offers a simple means for securing Ball Latches and magnetic latches to profiles of all lines. The catch housing and ball pin can be set to the precise position by means of the slots. The Catch Mounting Bracket minimises the gap between the doors and the outer frame.
Application examples of a Catch Mounting Bracket with Ball Latch 8 for swing and sliding doors. Depending on the particular application, either the ball pin (Ball Latch 8 PA), the holding plate (magnetic catch) or the housings of the relevant latches can be secured to the Catch Mounting Bracket.
By combining two Catch Mounting Brackets it is also possible to use latches to lock together profiles of the same size, minimising the gap between them. If the Catch Mounting Bracket is adjusted to the extreme of the slots, it may be necessary to use an appropriate washer between it and the profile to prevent tilting.
The connection is made on the profile side using M5 screws fitted into slots. ISO 7089 washers must be used.
