| Set CAD-format | ||
|---|---|---|
| Collision Guard L With Hazard Markings | CADPDFRFQ |
Preview
Collision Guard L With Hazard Markings
Collision Guard L, St, signal yellow similar to RAL 1003 Hazard Markings 375×295 SA
Scope of Delivery
Collision Guard L, St, signal yellow similar to RAL 1003 Hazard Markings 375x295 SA
Properties
| ESD-safe | No |
|---|---|
| Weight | m = 5.57 kg |
| Delivery unit | 1 pce. |
According to DGUV Regulation 108-007 (previously BGR 234), when a rack is loaded from a forklift or other freely steerable machinery and/or is located on a route used by such machinery, its corner areas must be protected by a mechanical cover. The robust item Collision Guard L is anchored to the ground and acts as a fixed guard to stop vehicles colliding with the rack. The L-shaped Collision Guard is 405 mm high. Collision Guard L is not joined to the rack. It provides added safety in areas where there is a high risk of collisions due to turning vehicles and trolleys. The black & yellow hazard markings draw attention to the guard unit in line with ASR A 1.3. item supplies floor anchors for various surface qualities, such as Floor-Fastening Set M10x135 (0.0.485.82).
A clearance of at least 60 mm must be maintained to ensure compliance with the DGUV regulations.
