| Set CAD-format | ||
|---|---|---|
| Transverse Fastener D30-60 | CADPDFRFQ |
Preview
Transverse Fastener D30-60
Preassembled 2 transverse fastener halves, die-cast Al, natural Hexagon Socket Head Cap Screw similar to DIN 912 M6x29.4, St, bright zinc-plated Hexagon nut DIN 934 M6-I8I, St, bright zinc-plated
Scope of Delivery
Preassembled 2 transverse fastener halves, die-cast Al, natural Hexagon Socket Head Cap Screw similar to DIN 912 M6x29.4, St, bright zinc-plated Hexagon nut DIN 934 M6-I8I, St, bright zinc-plated
Properties
| Line | Line D30 |
|---|---|
| ESD-safe | Yes |
| Weight | m = 101.9 g |
| Delivery unit | 1 pce. |
| Torque | M = 10 Nm |
A right angle in the modular dimension! Transverse Fastener D30-60 can be used to connect together two crossing Profile Tubes D30 at a 90° angle to each other. The distance between the two connected profiles is 60 mm, as opposed to the 48.5 mm spacing when using Transverse Fastener D30 (0.0.637.90). This means crossing profiles that are fastened to Double Profile Tubes D30-60 (0.0.682.60) can be connected in the correct modular dimension. Transverse Fastener D30-60 is supplied preassembled. Simply put it in place and tighten it for a secure hold. To reinforce pre-existing structures, the fastener halves can also be fitted separately, pushed into position and then screwed together.