| Set CAD-format |
|---|
Preview
Stand Profile 8 80×40 2xK60, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteProperties
| line 8 | line 8 |
|---|---|
| ESD-safe | Yes |
| Cross-sectional area | A = 7.92 cm2 |
| Moment of Inertia, torsional | It = 1.05 cm4 |
| Moment of Inertia, x-axis | Ix = 64.18 cm4 |
| Moment of Inertia, y-axis | Iy = 7.66 cm4 |
| Weight | m = 1.98 kg/m |
| Delivery unit | cut-off max. 6000 mm |
| Material | Al, anodized |
| Colour | natural |
Stand Profiles with integrated conduits on either one or both sides can be used for lightweight applications such as the frame construction for a roller conveyor or transfer system. These conduits can be used to accommodate cables for motors and sensors. A special Lid Profile is used to seal the conduit. In the case of profiles with installation conduits on both sides, the central web separating the conduits is provided with pre-punched openings for routing cables and hoses from one side to the other.
The openings are located at modular intervals and are used for running through cables and hoses. The Profiles are cut regardless of the positioning of the openings, therefore the minimum profile length is 160 mm.
Standard fastening is effected on the end face in conjunction with Stand Profile Connection Element 8 and Button-Head Screws ISO 7380-M8x20 (M = 25 Nm).
Fastening on the groove side is by means of a Pneumatic Universal-Fastening Set 8 or Automatic-Fastening Set 8.
By providing Stand Profile 8 80x40 with a ⌀ 14 mm bore, the profile can be used for routing cables and hoses.
