| Indstil CAD-format |
|---|
Forhåndsvisning
Glidestyrestrimmel 5/5e, sort
Konfigurerede produktdata
Intet genereret endnu
Du skal konfigurere dit produkt nedenfor, før du anmoder om tilbudProperties
| linje 5 | linje 5 |
|---|---|
| ESD-safe | Ingen |
| Vægt | m = 80 g/m |
| Delivery unit | cut-off max. 2000 mm |
| Materiale | PE-UHMW |
| Colour | sort |
The Slide Guide Strip can be mounted directly in the profile groove to create simple slide mechanisms. It can be screw-connected to the profiles of the surrounding frames or to moving modules. Slide Guides L and F are only suitable for installation on moving profiles. The offset "e" prevents the moving components from colliding with the fixed frame elements.
Slide Guide L (A = floating bearing) and Slide Guide F ( B = fixed bearing) as guide elements, secured to a moving component.
Required machining and fastening elements for fixing a Slide Guide Strip of any required length at the floating bearing end. The distance between the fastening elements should be chosen to reflect the load.
Required machining and fastening elements for fixing a Slide Guide Strip of any required length at the floating bearing end. The distance between the fastening elements should be chosen to reflect the load.
Required machining and fastening elements for fixing the Slide Guide Strip at the fixed bearing end. Slide Guide Strip 5/5e must be counterbored by c = 2 mm in the area of the screw head.
Required machining and fastening elements for fixing the Slide Guide Strip at the fixed bearing end. Slide Guide Strip 5/5e must be counterbored by c = 2 mm in the area of the screw head.