| Indstil CAD-format | ||
|---|---|---|
| Multiblock 8 Zn ESD | CADPDFRFQ |
Forhåndsvisning
Multiblock 8 Zn ESD
1 Multiblock 8 Zn, basic unit ESD, die-cast zinc, bright zinc-plated 1 Multiblock 8 Zn, locating lug ESD, die-cast zinc, bright zinc-plated 1 square nut DIN 557-M6-5, St, bright zinc-plated 1 leaf spring, St, stainless 1 T-Slot Nut 8 St M8, bright zinc-plated 1 Button-Head Screw ISO 7380 M6x25, bright zinc-plated 1 Button-Head Screw ISO 7380 M8x18, bright zinc-plated 1 washer ISO 7093-1-6-200 HV, bright zinc-plated
Scope of Delivery
1 Multiblock 8 Zn, basic unit ESD, die-cast zinc, bright zinc-plated 1 Multiblock 8 Zn, locating lug ESD, die-cast zinc, bright zinc-plated 1 square nut DIN 557-M6-5, St, bright zinc-plated 1 leaf spring, St, stainless 1 T-Slot Nut 8 St M8, bright zinc-plated 1 Button-Head Screw ISO 7380 M6x25, bright zinc-plated 1 Button-Head Screw ISO 7380 M8x18, bright zinc-plated 1 washer ISO 7093-1-6-200 HV, bright zinc-plated
Properties
| linje 8 | linje 8 |
|---|---|
| ESD-safe | Ja |
| Vægt | m = 93 g |
| Delivery unit | 1 set |
Multiblock 8 Zn ESD is used as an ESD-safe means of fastening panel elements to profile grooves, especially when heavy loads need to be carried. The Multiblock, which is adjustable in millimetre increments, ensures panels of different thicknesses can be fitted flush. The Multiblock incorporates either a through bore or a square nut that is secured against falling out by a leaf spring.
To ensure electrostatic dissipation, ESD-safe panel elements must always be fastened to Multiblock 8 Zn ESD using a screw that rests on the surface. Countersunk screws are not suitable. Important: For constructions in electrostatic protected areas, resistance measurements must always be carried out and documented to provide proof of ESD safety. item offers this as a service for turnkey solutions.
To fasten a panel element from above using an M8 screw, an M8 thread must be tapped into the core bore of the Multiblock.
