| Set CAD-format |
|---|
Preview
Clamp Profile 6 30×30-180°, natural
Cap Screws DIN 912-M4x12, St, bright zinc-plated
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteScope of Delivery
Cap Screws DIN 912-M4x12, St, bright zinc-plated
Properties
| line 6 | line 6 |
|---|---|
| ESD-safe | No |
| Cross-sectional area | A = 4.64 cm2 |
| Moment of Inertia, torsional | It = 0.47 cm4 |
| Moment of Inertia, x-axis | Ix = 3.53 cm4 |
| Moment of Inertia, y-axis | Iy = 3.88 cm4 |
| Weight | m = 1.55 kg/m |
| Delivery unit | cut-off max. 6000 mm |
| Material | Al, anodized |
| Colour | natural |
Where the panels are to be divided by a central strut (Clamp Profile 180°), this should always be tapped at the ends and bolted between the outer frame profiles. The Profile Edging (i.e. clamping strip) will need to be interrupted accordingly.
When designing a frame, it is important to ensure that horizontal Clamp Profiles are always connected via their end faces. An appropriate bore should be drilled through the vertical profiles.
When designing a frame, it is important to ensure that horizontal Clamp Profiles are always connected via their end faces. An appropriate bore should be drilled through the vertical profiles.
